# mechanics of materials

A cylindrical tank with flat endplates is constructed from two sections that are welded together circumferentially.The outer diameter of the tank is 1.20, and the wall of the tank is 20.0 mm thick and the mamimum internal pressure is 2.00 MPa.
(a) Calculate the maximum hoop stress in the tank
(b) Calculate the maximum tensile stress in the tank
(c) The tensile strength of the weld is 350 MPa and the shear strength of the weld is 40% of the tensile strength. what is the magnitude of the tensile stress that will cause the weld to burst open

## Similar Questions

1. ### mechanics of materials

A cylindrical tank with flat endplates is constructed from two sections that are welded together circumferentially.The outer diameter of the tank is 1.20, and the wall of the tank is 20.0 mm thick and the mamimum internal pressure
2. ### mechanics of materials

A cylindrical tank with flat endplates is constructed from two sections that are welded together circumferentially.The outer diameter of the tank is 1.20, and the wall of the tank is 20.0 mm thick and the mamimum internal pressure
3. ### mechanical properties of materials

A cylindrical tank with flat endplates is constructed from two sections that are welded together circumferentially.The outer diameter of the tank is 1.20, and the wall of the tank is 20.0 mm thick and the mamimum internal pressure
4. ### mechanical

A cylindrical tank with flat endplates is constructed from two sections that are welded together circumferentially.The outer diameter of the tank is 1.20, and the wall of the tank is 20.0 mm thick and the mamimum internal pressure
5. ### math

An open cylindrical tank has an internal diameter of 5.6 cm and an internal height of 4 cm. The inside of the tank was painted. What area of the tank, in square centimeters
6. ### geometry

A cylindrical tank is being constructed to hold 10,000 ft^3 of water. The diameter of the tank is 36ft. What is the minimum height needed for the tank?
7. ### Materials Science

A thin-wall cylindrical tank has radius R, wall thickness t≪R and is subjected to an internal pressure p. The cylindrical wall of the tank is constructed by welding steel plates along 45∘ seams, Consider a small
8. ### Mechanics of Materials

the propane gas tank has an inner diameter of 1500mm and wall thickness of 15mm. If the wall is pressurized to 2MPa, determine the absolute maximum shear stress in the wall of tank.
9. ### math

A cyclinder cooling tank has an outside diameter of 6.00 ft. the wall on all sides are 5.00in thick and the tank is 10.0ft tall. how many gallons of water will this tank hold?
10. ### math

A cyclinder cooling tank has an outside diameter of 6.00 ft. the wall on all sides are 5.00in thick and the tank is 10.0ft tall. how many gallons of water will this tank hold?

More Similar Questions