Chemistry

A student collected H2 gas in a buret by displacing water at 22.0 °C. The buret could not be submerged deep enough in a water bath to equalize the pressure. The water level in the buret was 18.2 cm above the water level in the water bath. The volume of the gas in the buret was determined to be 38.6 mL.

a) If the atmosphere pressure was 748 torr, what is the pressure of the Hydrogen in the buret? (Density of Hg is 13.6 g/mL)

b) How many moles of Hydrogen did the student collect?

  1. 👍 0
  2. 👎 0
  3. 👁 205
asked by Amy
  1. See your post above.

    1. 👍 0
    2. 👎 0

Respond to this Question

First Name

Your Response

Similar Questions

  1. Chemistry

    A student collected H2 gas in a buret by displacing water at 22.0 °C. The buret could not be submerged deep enough in a water bath to equalize the pressure. The water level in the buret was 18.2 cm above the water level in the

    asked by Amy on January 23, 2013
  2. Analytical CHM Lab

    I am filling out my neutralization titration data sheet and i did not understand how to find buret correction (ml) and corrected volume(ml) and Molarity of NaOH without buret correction and as well as with buret correction. in the

    asked by Jessy on September 19, 2014
  3. Chem

    When you are ready to record the total collected volume of hydrogen gas, it is only necessary to subtract the buret scale reading from 50.00, then add Vsmall subtract Vsmall from the buret scale reading record the buret scale

    asked by GUGi on October 26, 2014
  4. chemistry about buret

    In the experiment of buret calibration, what is the importance of having total buret correction? And does the density of the water at a specific temperature affect this corrections?

    asked by xavier on July 2, 2013
  5. Chemistry

    A buret is partially filled with NaOH solution, to a volume of 1.14mL. A 20-mL sample of 0.1011 M HCl is titrated to a faint pink phenolphthalein endpoint. The final buret buret reading is 22.37mL. What is the molarity of the NaOH

    asked by Michelle on March 27, 2015
  6. Chemistry - Titrations

    This is one of those titration labs, maybe you could answer it? Why must a buret be rinsed with NaOH solution before it is filled and not water? Note: ( Buret will be full of NaOH )

    asked by Dick Rogers on January 5, 2008
  7. CHEMISTRY

    If you use a dirty buret, the titrant leaves drops of solution behind as the meniscus descends during delivery of the solution. The volume actually delivered by the buret will be __________ the volume your readings of the buret

    asked by Anonymous on October 7, 2014
  8. Chemistry

    A buret (initial and final buret reading were 2.20 mL and 11.86 mL) was used to deliver a sample of 2.1E-5 M stock dye into a 25.0 mL volumetric flask. The dye was then diluted with water to exactly 25.0 mL. Calculate the molarity

    asked by Mallory on October 26, 2010
  9. Chemistry

    So i had trouble finding the answers to these questions on a lab: Background: If we were using a burret/flask instead of a pipette and well plates. Before you started, the buret must be rinsed with 1 ml of distilled water and then

    asked by PPLLEEAASE Help!!!! on October 1, 2009
  10. chemistry

    So i had trouble finding the answers to these questions on a lab: Background: If we were using a burret/flask instead of a pipette and well plates. Before you started, the buret must be rinsed with 1 ml of distilled water and then

    asked by Jenny on October 1, 2009

More Similar Questions