physics

A 9.0 m uniform beam is hinged to a vertical wall and held horizontally by a 5.0 m cable attached to the wall 4.0 m above the hinge, as shown below. The metal of the cable has test strength of 1.00 KN (kilo-Newton), which is the maximum tension magnitude T the cable can support. That means the cable will break if T is greater than this value.

(a) (4 points) What is the angel θ ?

(b) (2 points) What is the distance along the bean between the hinge and where the cable is attached to the beam?

(c) (32 points) What is the largest beam mass m (corresponding to the test strength) the cable can support with the given configuration shown?

(d) (4 points) Find the horizontal and vertical components of the force the hinge exerts on the beam,

  1. 👍
  2. 👎
  3. 👁
  1. jo

    1. 👍
    2. 👎

Respond to this Question

First Name

Your Response

Similar Questions

  1. Physics

    A uniform 34.5-kg beam of length = 4.95 m is supported by a vertical rope located d = 1.20 m from its left end as in the figure below. The right end of the beam is supported by a vertical column. a) Find the tension in the rope.

  2. physics

    A uniform 8 m 1500 kg beam is hinged to a wall and supported by a thin cable attached 2 m from the free end of the beam as shown in the figure. The beam is supported at an angle of 30 degrees above the horizontal. a) free diagram

  3. physics

    a 10.0m long bar is attached by a frictionless hing to a wall and held horizontally by a rope that makes an angle of 53 deg with the bar the bar is uniform and weights 39.9 N. how far from the hinge should a 10.0kg mass be

  4. Physics

    A uniform beam of length 1.0 m and mass 16 kg is attached to a wall by a cable that makes an angle of 30 degrees with the end of the beam, as shown in the figure. The beam is free to pivot at the point where it attaches to the

  1. Calculus

    A searchlight rotates at a rate of 2 revolutions per minute. The beam hits a wall located 8 miles away and produces a dot of light that moves horizontally along the wall. How fast (in miles per hour) is this dot moving when the

  2. Physics

    A floodlight with a mass of 20.0 kg is used to illuminate the parking lot in front of a library. The floodlight is supported at the end of a horizontal beam that is hinged to a vertical pole. A cable that makes an angle of 30

  3. calculus

    A searchlight rotates at a rate of 4 revolutions per minute.? The beam hits a wall located 13 miles away and produces a dot of light that moves horizontally along the wall. How fast (in miles per hour) is this dot moving when the

  4. Physics

    A purple beam is hinged to a wall to hold up a blue sign. The beam has a mass of mb = 6.7 kg and the sign has a mass of ms = 17.4 kg. The length of the beam is L = 2.83 m. The sign is attached at the very end of the beam, but the

  1. Physics! plese help

    A 1320-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A 1960-N crate hangs from the far end of the beam. Using the data shown in the figure, find (a) the magnitude of the

  2. physics

    a uniform ladder 16 m long weighing 80 N leans against a smooth vertical wall, making 30 degree with the wall. Find the thrust of the wall, and the force of the point on the ground.

  3. physics

    The figure shows a uniform beam of mass m pivoted at its lower end, with a horizontal spring attached between its top end and a vertical wall. The beam makes an angle è with the horizontal. (a) Find expression for the distance d

  4. calculus

    A searchlight rotates at a rate of 3 revolutions per minute. The beam hits a wall located 7 miles away and produces a dot of light that moves horizontally along the wall. How fast (in miles per hour) is this dot moving when the

You can view more similar questions or ask a new question.