# physics

A mass m = 11.0 kg rests on a frictionless table and accelerated by a spring with spring constant k = 4979.0 N/m. The floor is frictionless except for a rough patch. For this rough path, the coefficient of friction is μk = 0.46. The mass leaves the spring at a speed v = 2.8 m/s.
The mass is measured to leave the rough spot with a final speed vf = 1.5 m/s.
In this new scenario, what would the coefficient of friction of the rough patch need to be changed to in order for the block to just barely make it through the rough patch?

1. 👍 0
2. 👎 0
3. 👁 433

## Similar Questions

A light spring of constant k = 170 N/m rests vertically on the bottom of a large beaker of water. A 5.70 kg block of wood (density = 650 kg/m3) is connected to the spring and the mass-spring system is allowed to come to static

asked by julie on December 20, 2010
2. ### PHYSICS/MATH

A mass and spring are arranged on a horizontal, frictionless table. The spring constant is k = 450 N/m, and the mass is 5.4 kg. The block is pushed against the spring so that the spring is compressed an amount 0.35 m, and then it

asked by HP on April 12, 2013
3. ### physics

A block of mass m = 3.53 kg is attached to a spring which is resting on a horizontal frictionless table. The block is pushed into the spring, compressing it by 5.00 m, and is then released from rest. The spring begins to push the

asked by Anonymous on March 25, 2017
4. ### physics

A block with mass m = 17 kg rests on a frictionless table and is accelerated by a spring with spring constant k = 4201 N/m after being compressed a distance x1 = 0.556 m from the spring’s unstretched length. The floor is

asked by katie on March 20, 2018
5. ### Physics Spring

A mass sitting on a horizontal, frictionless surface is attached to one end of a spring; the other end is fixed to a wall. 1.0 J of work is required to compress the spring by 0.12 m. If the mass is released from rest with the

asked by Dan on November 15, 2010
1. ### physics

A block with mass m = 17 kg rests on a frictionless table and is accelerated by a spring with spring constant k = 4201 N/m after being compressed a distance x1 = 0.556 m from the spring’s unstretched length. The floor is

asked by amanda on March 20, 2018
2. ### Physics

You have been asked to design a "ballistic spring system" to measure the speed of bullets. A bullet of mass m is fired into a block of mass M. The block, with the embedded bullet, then slides across a frictionless table and

asked by Marie on March 23, 2014
3. ### physicssssss

A block with mass m = 14 kg rests on a frictionless table and is accelerated by a spring with spring constant k = 4545 N/m after being compressed a distance x1 = 0.515 m from the spring’s unstretched length. The floor is

asked by aaa on October 8, 2011
4. ### physics

a block of mass 0.1kg is attached to spring and placed on a horizontal frictionless table .the spring is stretched 20cm when a force of 5n is applied.calculate the spring constant

asked by ali on April 22, 2017
5. ### physics

a rifle bullet of mass 8.0g strikes and embeds itself in a block of mass 0.992kg that rests on a frictionless horizontal surface and is attached to a coil spring. the impact compresses the spring 15.0cm. calibration of the spring

asked by #PAKIsagotPARAbukas on February 17, 2016
6. ### Physics URGENT!!!

A spring of negligible mass stretches 2.14 cm from its relaxed length when a force of 8.40 N is applied. A 1.300 kg particle rests on a frictionless horizontal surface and is attached to the free end of the spring. The particle is

asked by Sarah on November 19, 2012