# Heat Transfer

A fin 30 cm long & 10mm diameters throughout is made of steel alloy of thermal conductivity 43 W/m-deg. the fin attached to a plane heated wall at 200 deg.C temp. extends into surroundings at 25 deg.C.& Unit surface conductance of 120W/m^2-deg. Workout the heat flow rate from the fin to surroundings.Presume that the tip of the fin is insulated & thermal radiation effects are negligible.

1. 👍 0
2. 👎 0
3. 👁 209

## Similar Questions

1. ### Math

An alloy is composed of nickel, zinc, and copper in a ratio of 3:4:13. How many kilograms of each metal are needed to make 4 kg of this alloy?

asked by HELP on May 14, 2017
2. ### math

German Silver is an alloy composed of nickel, zinc, and copper in a ratio of 3:4:13. How many kilograms of each metal are needed to make 4 kg of this alloy?

asked by vance on November 9, 2019
3. ### Materials Science

A cylindrical pressure vessel, with a diameter of 40cm and a wall thickness of 10mm is made of steel (isotropic, with Young’s modulus = 200GPa; Poisson’s ratio = 0.28) and is pressurized to 20MPa. The longitudinal and hoop

asked by qwerty on October 1, 2014
4. ### Material Sciences

Given an aluminum shell perfectly bonded to a steel core, what is the thermal stress in the aluminum shell when the system is heated from the unstressed state (20∘C) to 180∘C? Consider only deformations in the axial

asked by qwerty on September 27, 2014
5. ### chemistry

when 45g of an alloy is dropped into 100.0 g of water at 25c, the final temperature is 37c. what is the specific heat of the alloy

asked by andrea on May 19, 2010
1. ### mechanical behaviour of materials

n isotropic alloy contains 5% by volume of a precipitate of radius 10nm. Assume the primary metal is in a simple cubic arrangement. The alloy has a Young's modulus E=70GPa and a Poisson's ratio ν=0.35. If Γ=0.9J/m2 (the energy

asked by karthik on November 27, 2016
2. ### Geometry

An alloy of copper is 10% copper and weighs 25 pounds. A second alloy is 18% copper. How much (to the nearest tenth lb.) of the second alloy must be added to the first alloy to get a 13% mixture.

asked by Ivan on January 18, 2011
3. ### math

Anne and Nancy use a metal alloy that is 20.45% copper to make jewelry. How many ounces of a 12% alloy must be mixed with a 25% alloy to form 100 ounces of the desired alloy?

asked by heather on July 30, 2018
4. ### Material Science

cylindrical pressure vessel, with a diameter of 40cm and a wall thickness of 10mm is made of steel (isotropic, with Young’s modulus = 200GPa ; Poisson’s ratio = 0.28 ) and is pressurized to 20MPa . The longitudinal and hoop

asked by Ftmnr on June 10, 2019
5. ### physics

the relative density of an alloy is 6.5.find the mass of the solid alloy cube of side 20cm.what volume of the alloy has a mass of 13kg

asked by relative density on November 16, 2011
6. ### math

A steel post is 6 ft. long and 6" thick in diameter. If a cubic foot of steel weighs 490 lb., how much does the rod weigh (to the nearest pound)?

asked by Becky on June 24, 2014