Physics

A green sedan weighing 25,000 Newtons is put on a lift supported by a piston with
a cross sectional area of 0.1 square meters.  What is the minimum force that must
be exerted by the air compressor that pushes down on the oil in the reservoir of the lift system in order to lift the sedan if the cross-sectional area of the reservoir  
is 1.0 square meter? (Hint: use Pascal’s Law.)
   

  1. 👍 0
  2. 👎 0
  3. 👁 151

Respond to this Question

First Name

Your Response

Similar Questions

  1. Science

    A hydraulic lift office chair has its seat attached to a piston with an area of 11.2 cm2 . The chair is raised by exerting force on another piston, with an area of 4.12 cm2 . If a person sitting on the chair exerts a downward

  2. Physics 1

    A school teacher’s sedan can go from 0 to 25 m/s in only 4.0 seconds. What is the acceleration of the sedan?

  3. physics

    A box weighing 100 newtons is pushed up an inclined plane that is 5 meters long. It takes a force of 75 newtons to push it to the top,which has a height of 3 meters. What is the efficiency?

  4. Physics

    A box weighing 450 Newtons is pulled along a level floor at an angle of 30 degrees with the floor.If the force of the rope is 260 Newtons.What is the coefficient of sliding friction for the surface?

  1. Physics

    A uniform scaffold 6m long and weighing 700 N is supported by two vertical ropes that hung from its ends. Find the tension in each rope when a painter weighing 750N stands 2 m from one end.

  2. Physics

    In a hydraulic lift, if the radius of the smaller piston is 2 cm and the radius of the larger piston is 20 cm, what weight can the larger piston support when a force of 250 N is applied to the smaller piston? d = diameter of

  3. Physics

    A hydraulic lift has 1000 N applied to an input piston that has an area of 30 cm2. What is the pressure exerted on the input piston?

  4. Physics

    A HYDRAULIC JACK HAS AN INPUT PISTON OF AREA 0.050M AND AN OUTPUT PISTON OF AREA 0.70M.HOW MUCH FORCE ON THE INPUT PISTON IS REQUIRED TO LIFT A CAR WEIGHING 12000N

  1. physics

    The small piston of a hydraulic lift has a diameter of 8 cm and its large piston has a diameter of 40cm. The lift raises a load of 15,000 Newtons. A. Determine the force that must be applied to the small piston. B. Determine the

  2. PHYSICS !!

    A car weighing 10,000 newtons is parked in a garage. Which statement is true about the forces acting on the car?

  3. physics help please!

    The motion of a piston in an auto engine is simple harmonic. The piston travels back and forth over a distance of 23 cm, and the piston has a mass of 1.7 kg. 2515 rpm 23 cm max speed of the piston 30.28757 m/s What is the maximum

  4. Physics

    In a hydraulic lift, the radii of the pistons are 2.93 cm and 10.1 cm. A car weighing W = 11.0 kN is to be lifted by the force of the large piston. (a) What force Fa must be applied to the small piston? N (b) When the small piston

You can view more similar questions or ask a new question.