# physics help plz thanks

An arrangement of two pulleys, as shown in the figure, is used to lift a 49.6-kg mass a distance of 3.70 m above the starting point. Assume the pulleys and rope are ideal and that all rope sections are essentially vertical.

(a) What is the mechanical advantage of this system? (In other words, by what factor is the force you exert to lift the weight multiplied by the pulley system?)

(b) What is the change in the potential energy of the weight when it is lifted a distance of 3.70 m?
kJ
(c) How much work must be done to lift the 49.6-kg mass a distance of 3.70 m?
kJ

(d) What length of rope must be pulled by the person lifting the weight 3.70 m higher in the air?
m

Could someone please explain and help me out with this thank you.

1. 👍 0
2. 👎 0
3. 👁 273
1. 255

1. 👍 0
2. 👎 0

## Similar Questions

1. ### physics

An arrangement of two pulleys, as shown in the figure, is used to lift a 49.6-kg mass a distance of 3.70 m above the starting point. Assume the pulleys and rope are ideal and that all rope sections are essentially vertical. (a)

2. ### PHYSICS HELP

The maximum lift force on a bat is proportional to the square of its flying speed v. For the hoary bat (Lasiurus cinereus), the magnitude of the lift force is given by FL (0.021 N·s2/m2)v2 The bat can fly in a horizontal circle

3. ### Trigonometry

Mountain officials want to build a new ski lift from B to C as shown in the figure below. The distance from A to C is 1480 feet. They measure angle DAC to be 32 degrees and angle DBC to be 18 degrees. What is the distance A from

4. ### Physics.

The figure below shows an arrangement of 15 identical disks that have been glued together in a rod-like shape of length L = 1.4500 m and (total) mass M = 135.000 g. The arrangement can rotate about a perpendicular axis through its

1. ### Physics

The pulley system shown in the figure is used to lift a 37 kg crate. Note that one chain connects the upper pulley to the ceiling and a second chain connects the lower pulley to the crate. Assume that the masses of the chains,

2. ### Physics

A system of pulleys is used to lift a load of 1000kg.if the efficiency of pulley system is 80%and velocity ratio is 20,find effort required to lift the load...............??

A person bending forward to lift a load with his back, as shown in the figure, rather than with his knees can be injured by large forces exerted on the muscles and vertebrae. The spine pivots mainly at the fifth lumbar vertebra,

4. ### Physics

The maximum lift force on a bat is proportional to the square of its flying speed v. For the hoary bat (Lasiurus cinereus), the magnitude of the lift force is given by FL (0.020 N·s2/m2)v2 The bat can fly in a horizontal circle

1. ### Physics

Two massless springs (S1 and S2) are arranged such that one hangs vertically downward and the other is vertically upward, as shown in figure (a). When a 0.275-kg mass is suspended from S1, it stretches by an amount Δx1 = 0.062 m,

2. ### physics

A worker in a warehouse uses a rope passing through some pulleys to lift a heavy crate. The worker exerts a force five times less than the weight of the crate but has to move the rope four times as far as the crate moves. This

3. ### Physics

The femur of a human leg (mass 10 kg, length 0.9 m) is in traction, as shown in the figure below. The center of gravity of the leg is one-third of the distance from the pelvis to the bottom of the foot. Two objects, with masses m1

4. ### physics

Two blocks with masses M1 = 3.9 kg and M2 = 5.0 kg are connected with a massless string over two massless and frictionless pulleys, as shown in the Figure. One end of the string is connected to M1 while the other end is fixed.