science

a u-tube is partially filled with water.oil which does not mix with water is next poured into one side until water rises by 2.5cm on the other side.if the density of oil be 0.8 ,the oil level will stand higher than the water level by how much?

asked by abuobaida johar
  1. ans is 12.50

    posted by manthan

Respond to this Question

First Name

Your Answer

Similar Questions

  1. Physics

    A U-shaped tube is filled mostly with water, but some vegetable oil has been added to both sides of the U tube. On the right side of the tube, the depth of oil is 5.00 cm . On the left side of the tube, the depth of the oil is
  2. physics

    Four tubes are set up in the lab at sea level as shown by the figure. The letter under each tube corresponds the question with the same letter. 1 atm = 101300 Pa = 101300 N/m2 ρwater = 1000 kg/m3 (a) What is the pressure
  3. physics

    Please reference the following picture for this question: screenshots<dot>firefox<dot>com/V57wh6MYWUXfnx5M/brilliant<dot>org Initially, the U-tube shown above is filled with water, and the level on each side is
  4. Physics- PLEASE!!

    A U-shaped tube is filled mostly with water, but some vegetable oil has been added to both sides of the U tube. On the right side of the tube, the depth of oil is 5.00 cm . On the left side of the tube, the depth of the oil is
  5. Physics

    A bucket is filled with a combination of water (density 1,000 kg/m3) and oil (density 700 kg/m3). These fluids do not mix. (The oil will float on top of the water.) If the layer of oil is 63 cm tall, what is the pressure at the
  6. Physics

    Salt water is poured into a U tube until it stands 0.250 m high in each arm. Oil is then added slowly to one arm until the salt water in the other arm stands 0.300 m high. The free surface of the oil then stands at 0.321 m high.
  7. Physics

    A cubical block of wood 0.100 m on a side and with a density 550 kg/m^3 of floats in a jar of water. Oil with a density of 750 kg/m^3 is poured on the water until the top of the oil layer is 0.035 m below the top of the block. 1.
  8. Science

    Can you tell me the Main Idea(s)? There’s an old saying that oil and water don’t mix. But sometimes they do — especially when a chemical called a surfactant brings the two together. Once blended, oil and water become tough
  9. PHYS101

    oil is added to the right hand arm of a U-tube containing water.The oil floats above the water to a height of h=10cm.The top of the oil+water column is a height d=2cm above the top of the water column in the other arm .Calculate
  10. Physics

    In a huge oil tanker, salt water has flooded an oil tank to a depth of h2 = 4.50 m. On top of the water is a layer of oil h1 = 7.55 m deep, as in the cross-sectional view of the tank as shown in the figure. The oil has a density

More Similar Questions