1. Questions

physics

A hydraulic press has an input cylinder 1 m in diameter and an output cylinder 2 meters in diameter. Assuming 100% efficiency, find the force exerted by the output piston when a force of 10 Newtons is applied to the input piston.
pounds
If the input piston is moved through 5 meters, how far is the output piston moved?
meters

  1. 👍
  2. 👎
  3. 👁
Anonymous

  1. F2/F1 = S2/S1 =πR^2/πr^2= (R/r)^2

    S1=V1/h1
    S2=V2/h2

    F2/F1 =h1/h2

    1. 👍
    2. 👎
    Elena

Respond to this Question

First Name

Your Response

Similar Questions

  1. MATH

    A cylinder has a circular base with a diameter of 12 ft. The height of the cylinder is 4 ft. What is the volume of the cylinder rounded to the nearest whole number? Use 3.14 for pi. A. 452in2 B. 1,809ft2 C. 151ft2 D. 603ft2

  2. science

    a hydrauli press has a ram of 30 cm diameter and plunger of 4.5cm diameter. find the the weight lifted by the hydraulic press when the force applied at the plunger is 500N

  3. Physics

    The diameter of ram and plunger of a hydraulic press are 200 mm and 30 mm respectively.find the weight lifted by the hydraulic press when the force applied at the plungeris 400 N

  4. Math

    Suppose Cylinder A has the same height but twice the radius of Cylinder B. What is the ratio of the volume of Cylinder B to Cylinder A?

  1. PHYSICS

    The input piston of a hydraulic press is 20mm in diameter, and the output piston is 10mm in diameter. an input force of 1.0N will produce an output force of: a- 0.25N b- 0.50N c- 2.0N D- 4.0N

  2. math

    A cylinder has a circular base with a diameter of 12 ft. The height of the cylinder is 4 ft. What is the volume of the cylinder rounded to the nearest whole number? Use 3.14 for pi.

  3. Math

    Hey, I need your help! I have an input output table that I need the function rule for. The table is like this: Input: 0 Output: 25 Input: 100 Output: 35 Input: 200 Output: 45 Input: 300 Output: 55 Input: 400 Output: 65 PLEASE I

  4. geometry

    The diameter and height of this cylinder are equal to the side length, S, of the cube in which the cylinder is inscribed. What is the expression for the cylinder's volume?

  1. Physics

    the input and output of hydraulic jack are respectively 1 cm and 4 cm in diameter. A lever with a mechanical advantage of 6 is used to apply force to the input piston. How much mass can the jack lift if a force of 180 N is applied

  2. physics

    A small cylinder rests on a circular turntable that is rotating clockwise at a constant speed. The cylinder is at a distance of r = 12 cm from the center of the turntable. The coefficient of static friction between the bottom of

  3. Algebra 1 Honors

    The volume of a cylinder is 157 cubic inches. The base of the cylinder has a diameter of 5 inches. What is the height of the cylinder? Round to the nearest tenth of an inch.

  4. chemistry

    Titanium is used in airplane bodies because it is strong and light. It has a density of 4.55 g/cm^3. If a cylinder of titanium is 7.75 cm long and has a mass of 153.2 g, calculate the diameter of the cylinder. (V=pi*r^2*h, where V

You can view more similar questions or ask a new question.