math (Calculus)

A circular pulley with a radius of 10 cm is turning at 12 revolutions per minute. How
fast is a point on the edge of the pulley rising when it is 5 cm higher than the center of
the pulley?

  1. 👍
  2. 👎
  3. 👁

Respond to this Question

First Name

Your Response

Similar Questions

  1. Math

    If a wheel turning at a constant rate completes 100 revolutions in 10 sec what is its angular speed?

  2. Physics

    The two masses (m1 = 5.0 kg and m2 = 3.0 kg) in the Atwood's machine shown in Figure 10-23 are released from rest, with m1 at a height of 0.91 m above the floor. When m1 hits the ground its speed is 1.5 m/s. Assume that the pulley

  3. Trig

    A pulley with a diameter of 24 inches is driven by a belt which is moving 1045 ft/min. How many revolutions per minute are made by the pulley?

  4. physics

    a pulley of 5cm radius on a motor is turning at 30 rev/s and slows down uniformly to 20 rev/s in 2s. calculate the angular acceleration of the motor number of revolution it makes in this time and lenght of belt it winds in this

  1. physics

    A Ferris wheel with radius 14.0 m is turning about a horizontal axis through its center, as shown in the figure below. The linear speed of a passenger on the rim is constant and equal to 6.00 m/s. A.What is the magnitude of the

  2. college trig

    find the radius of a pulley if rotating the pulley 108.03 degrees raises the pulley 37.3mm

  3. Plane trigonometry

    A pulley having a diameter of 36 cm is turned by a belt that moves at the rate of 5m/sec . How many revolutions does the pulley make per/sec?

  4. Need help at this very minute with physics

    In Figure 10-53, two blocks, of mass m1 =400 g and m2 =600 g, are connected by a massless cord that is wrapped around a uniform disk of mass M = 500 g and radius R = 12.0 cm. The disk can rotate without friction about a fixed

  1. math

    yank hardy pulls the cord on his power mower. in order for the engine to start, the pulley must turn at 180 revolutions per minute. the pulley has a radius of 0.2 ft. how many radians per second must the pulley turn? How fast must

  2. Physics, please help me today.

    four pulleys are connected by two belts. Pulley A (radius 15cm) is the drive pulley and it rotates at 10 rad/s. Pulley B (radius 10 cm) is connected by belt 1 to pulley A. Pulley B' (radius 5cm) is concentric with pulley B and is

  3. Trig

    Two pullies are connected by a belt, Pulley A has a radius of 3 cm and pulley B has a radius of 6cm. As Pulley A rotates, a drop of paint on the circumference of pulley B rotates around the axle of Pulley B. Initially the paint

  4. physics

    You create a centripetal force apparatus consisting of a mass m attached to the end of a string and spun in a uniform circular path of radius R, where R = 65.5 cm. The mass is spun in a uniform circular path for 60.0 seconds,

You can view more similar questions or ask a new question.