# physics

The energy needed to raise a load of mass 10 kg is 100 J. The height of the load at the end of the
process is

1. 👍 0
2. 👎 0
3. 👁 110
1. 100 = M g H
Solve for H

1. 👍 0
2. 👎 0
posted by drwls

## Similar Questions

1. ### Physics!

Question #4 : What is the amount of energy used to raise a 3000N load 0.4m? A force of 1000N is used to raise that same load up. 1)State the mechanical advantage of the machine used? 2)Is this machine 100% efficient?

asked by Jessie USA on March 7, 2017
2. ### maths(variation)

pls when solving finish it up!!! Very urgent! 1) the load which a crame can lift up is directly proportional to the mass and inversely proportional to the height through which the load is to be lifted.if a load of 40 and mass of

asked by chinaemerem on April 28, 2017
3. ### Science

A 1500 W winch is used to raise a load of bricks to a height of 25m. If the bricks need to reach this height in 1.5 minutes. What is the maximum allowable mass of the load bricks?

asked by Masabata on May 1, 2019
4. ### maths

the load which a crame can lift up is directly proportional to the mass and inversely proportional to the height through which the load is to be lifted.if a load of 40+ and mass of 175gm is lifted through height from what load

asked by chinaemerem on April 25, 2017
5. ### variation

the load which a crame can lift up is directly proportional to the mass and inversely proportional to the height through which the load is to be lifted.if a load of 40 and mass of 175gm is lifted through height of 286m,from what

asked by cynthia on April 28, 2017
6. ### math

the load which a crame can lift up is directly proportional to the mass and inversely proportional to the height through which the load is to be lifted. If a load of 40 and mass of 175gm is lifted through height of 286m from what

asked by cynthia on April 28, 2017
7. ### Physics

A crane lifts a 200kg load at a steady velocity.It takes 12s to raise the load through 60m. i) What is the power needed to lift the load if there is no friction? ii) What is the power needed if the friction force is constant at

asked by Hejumacal on October 18, 2015
8. ### physics

A block and tackle has a velocity ratio of 4 and it is used to vertically raise a load of mass 50kg.if the effciency is 80%,determine the minimum effort reguired to raise the load.

asked by Anonymous on November 1, 2016
9. ### Physical Science

How much work is needed to raise a 110-kg load of bricks 12 m above the ground to being under construction? work in joules= weight*height where weight is mass*9.8m/s^2

asked by Tammy on January 9, 2007
10. ### maths (variation)

different questions pls! Very urgent! 1) the force E needed to make a machine pull,a load is partly constant and partly varies as the load to be pulled itself.when the load is 20g,the force needed is 1.4n,where as the force needed

asked by chinaemerem on April 27, 2017

More Similar Questions