# science

effect of heat on iron

1. 👍 0
2. 👎 0
3. 👁 126

1. 👍 0
2. 👎 0

## Similar Questions

1. ### physics

In lab you submerge 100 g of 41 degree Celcius iron nails in 100 g of 25 degree Celcius water (the specific heat of iron is 0.12 cal/g degrees Celcius) A)Equate the heat gained by the water to the heat lost by the nails and find

2. ### chemistry

Am I correct? Deterioration of buildings, bridges, and other structures through the rusting of iron costs millions of dollars everyday. Although the actual process also requires water, a simplified equation (with rust shown as

3. ### cochise

How many kilocal are required to increase the temperature of 15.6 g of iron from 122 °C to 355 °C? The specific heat of iron is 0.450 J/g °C

4. ### science

if the specifc heat of iron = 0.46J/g C,how much heat is needed to warm 50g of iron from 20C to 100C -- I do not know how to make the celcius o above the temperature number my anwswer Q = Mx(delta)TxC Q=50gx80Cx0.46J/gC Q = 1840

1. ### Chemistry

The specfic heat of iron is 0.11cal/g C. The heat of fusion of iron, the heat required to convert iron from a solid to liquid at its melting point, is 63.7cal/g. Iron melts at 1530 C. How much heat must be added to 2g of iron at

2. ### Chemistry

1) Determine the amount of heat in kJ given off when 1.26 x 10^4 g of NO2 are produced according to the equation: 2NO (g) + O2 (g) --> 2NO2 (g) and delta (H) = 483.6 kJ/mol 2) A sheet of gold weighing 10 g and at a temperature of

3. ### physics

A hot iron horseshoe (mass = 0.43 kg), just forged (Fig. 14-16), is dropped into 1.60 L of water in a 0.26 kg iron pot initially at 20°C. If the final equilibrium temperature is 26°C, estimate the initial temperature of the hot

4. ### Chemistry

The overall reaction in a commercial heat pack can be represented as shown below. 4 Fe(s) + 3 O2(g) 2 Fe2O3(s) ΔH = -1652 kJ How much heat is released when 4.00 mol iron is reacted with excess O2? How much heat is released when

1. ### physics

a bimetallic compound strip of brass and iron is 10cm long at 20C. When heated over a Bunsen burner flame the temperature of the brass rises to 800C and the iron to 750C. Calculate the difference in lengths of the iron and brass.

2. ### chemistry

The specific heat capacity of iron is 0.45 j/g oC. how many joules of energy are needed to warm 1.3100000000000001 g of iron from 20.00oC to 29.00 oC ?

3. ### Chemistry

A 22.44g sample of iron absorbs 180.8J of heat, upon which the tempature of the sample increases from 21.1 C to 39.0 C. What is the specific heat of iron?

4. ### Chemistry

A 5.00-g sample of aluminum pellets (specific heat capacity = 0.89 J/°C · g) and a 10.00-g sample of iron pellets (specific heat capacity = 0.45 J/°C · g) are heated to 100.0°C. The mixture of hot iron and aluminum is then