# physics

A 15.0 kg mass and a 10.0 kg mass are suspended by a pulley that has a radius of 10.0 cm and a mass of 3.0 kg. The cord has negligible mass and causes the pulley to rotate without slipping. The puller is frictionless and may be treated as a uniform solid cylinder. Note that the tension in the cord is not the same on both sides of the pulley. a)Determine the speeds of the two masses as they pass each other. b)Determine the tension in the cord on either side of the pulley. c) Determine the total kinetic energy of the system at the instant the pulley's angular displacement is 30.0 rad.

1. 👍 0
2. 👎 0
3. 👁 335
1. I don't know, can you tell me?

1. 👍 0
2. 👎 2

## Similar Questions

1. ### physics

A pulley is suspended by a Cord (C). on one end of the pulley there is a 1.2 kg block and on the other is a 3.2 kg block.Determine the tension in this cord after the masses are released and before one hits the ground. Ignore the

asked by Anonymous on February 14, 2013
2. ### Physics

Two masses are suspended from a pulley as shown in the figure . The pulley itself has a mass of 0.30 kg, a radius of 0.20 m, and a constant torque of 0.30 m \cdot N due to the friction between the rotating pulley and its axle.

asked by Stacy on November 28, 2010
3. ### physics

A stone is suspended from the free end of a wire that is wrapped around the outer rim of a pulley, as shown in the figure (see the figure ). The pulley is a uniform disk with mass 10.4 and radius 51.0 and turns on frictionless

asked by Anonymous on May 13, 2012
4. ### physics 209

A mass m = 0.5 kg is hung from a pulley with moment of inertia I = 0.20kg⋅m2 and radius R = 10cm. There is friction in the pulley. The mass is dropped from rest, and after 2s it traveled 0.4m. What is the torque due to friction?

asked by mike on November 19, 2012
5. ### Physics

The two masses shown in the figure are each initially 1.80 m above the ground, and the massless frictionless pulley is fixed 4.8 m above the ground. (mA = 1.5 kg and mB = 3.4 kg.) What maximum height does the lighter object reach

asked by Megan on September 21, 2014
1. ### physics

Two masses are suspended from a pulley as shown in the figure below (the Atwood machine). The pulley itself has a mass of 0.20 kg, a radius of 0.15 m, and a constant torque of 0.35 m·N due to the friction between the rotating

asked by i need help please! on January 9, 2011
2. ### physics

Two masses are suspended from a pulley as shown in the figure below (the Atwood machine). The pulley itself has a mass of 0.20 kg, a radius of 0.15 m, and a constant torque of 0.35 m·N due to the friction between the rotating

asked by lissa on January 9, 2011
3. ### Physics

A massless string runs around two massless, frictionless pulleys, where one pulley is attached to the ceiling, and the other is suspended with a mass m. An object with mass m = 17 kg hangs from one pulley. A force F is exerted on

asked by Nikita on November 17, 2009
4. ### Physics helppp

In the figure below, three ballot boxes are connected by cords, one of which wraps over a pulley having negligible friction on its axle and negligible mass. The masses are mA = 30.0 kg, mB = 40.0 kg, mC = 28.0 kg. The image is a

asked by Sam on July 14, 2010
5. ### Physics

In an Atwood machine, one block has a mass of M1 = 520 g and the other has a mass of M2 = 320 g. The frictionless pulley has a radius of 4.6 cm. When released from rest, the heavier block moves down 51 cm in 1.00 s (no slippage).

asked by Morgan on November 5, 2011
6. ### physics

A pulley rotating in the counterclockwise direction is attached to a mass suspended from a string. The mass causes the pulley's angular velocity to decrease with a constant angular acceleration α = -2.2 rad/s2. If the pulley's

asked by aok on November 4, 2010