# Physics

Two forces are applied to a car in an effort to move it, as shown in the following figure, where F1 = 402 N and F2 = 364 N. (Assume up and to the right as positive directions.)(F1 is 10degrees and F2 is 30degrees)
(a) What is the resultant of these two forces?
magnitude
direction

(b) If the car has a mass of 3,000 kg, what acceleration does it have? Ignore friction.

1. 👍
2. 👎
3. 👁
1. F1 = 402N @ 10 Deg.
F2 = 364N @ 30 Deg.

a. X = hor. = 402cos10 + 364cos30,
X = 395.9 + 315.2 = 711.1N.

Y = ver. = 402sin10 + 364sin30,
Y = 69.8 + 182 = 251.8N.

tanA = Y/X = 251.8 / 711.1 = 0.3541,
A = 19.5 Deg. = Direction.

M = X/cosA = 711.1 / cos19.5 = 754.4N =
Magnitude.

b. F = ma,
a = F/m = 754.4 / 3000 = 0.25m/s^2

1. 👍
2. 👎
2. remember if the degrees is negative then subtract it from 360

example:
F1 @ -10 deg
F2 @ 30 deg

F1 is actually @ 350 deg
F2 is still 30 deg

1. 👍
2. 👎
3. You have to remember that there's no force being created on the x axis, the answer below must've been wrong because of that.

1. 👍
2. 👎
4. For A use)
Magnitude = (X^2+Y^2)^1/2
tan^-1(theta) = X/Y

For B use)
a = Magnitude/mass

1. 👍
2. 👎
5. theta = tan^1(X/Y)

1. 👍
2. 👎
6. After I solve for the angle by using tangent, is that angle the direction? or am I supposed to subtract it from something (like 90)?

1. 👍
2. 👎

## Similar Questions

1. ### physics

A car is being pulled out of the mud by two forces that are applied by the two ropes shown in the drawing. The dashed line in the drawing bisects the 30.0° angle. The magnitude of the force applied by each rope is 2900 newtons

2. ### Physics

Two forces are applied to a car in an effort to accelerate it, as shown below. The first force, F1 = 364 N, is applied at an angle α = 33° to the forward dashed line. The second force, F2 = 522 N, is applied at an angle β =

3. ### Physics

A car is being pulled out of the mud by two forces that are applied by the two ropes shown in the drawing. The dashed line in the drawing bisects the 30.0° angle. The magnitude of the force applied by each rope is 2900 newtons.

4. ### physics

Three applied forces, F1= 20.0 N, F2= 40.0 N, and F3 = 10.0 N act on an object with a mass of 2.00 kg which can move along an inclined plane as shown in the figure. The questions refer to the instant when the object has moved

1. ### mabathoana high school maseru

A block and tackle system of 5 pulley is used to raise a load of 500N steady through a height of 20m the work done against friction is then 2000J. Calculate the work done By effort, efficiency and effort applied

2. ### Physics

Two stunt drivers drive directly toward each other. At time t=0 the two cars are a distance D apart, car 1 is at rest, and car 2 is moving to the left with speed v_0. Car 1 begins to move at t=0, speeding up with a constant

3. ### Physics

Consider a toy car which can move to the right or left along a horizontal line (the pos- itive part of the distance axis) and a force applied to that car. Identify the force that would allow the car to move toward the right (away

4. ### Physics

Two forces are applied to a car in an effort to accelerate it, as shown below. The first force, F1 = 328 N, is applied at an angle α = 35° to the forward dashed line. The second force, F2 = 464 N, is applied at an angle β =

1. ### Physics

A block and tacle of 6 pulley is used to raise a load of 300n steadily through a height of 30m if the workdone against friction is 2000j. calculate the workdone by the effort,the applied effort,the efficiency of the system

2. ### physics

A locomotive is pulling an empty freight car with a constant acceleration on a horizontal surface. The mass of the locomotive is five times the mass of the car. Which statement is true about the force applied by the car on the

3. ### Physics

Two forces are applied to a car in an effort to move it, as shown in the following figure, where F1 = 453 N and F2 = 400 N. (Assume up and to the right as positive directions.)(F1 is 8degrees and F2 is 35degreed) (a) What is the

4. ### physics

A car is being pulled out of the mud by two forces that are applied by the two ropes shown in the drawing. The dashed line in the drawing bisects the 30.0° angle. The magnitude of the force applied by each rope is 2900 newtons