physics

A 1520-N crate is to be held in place on a ramp that rises at 30.0° above the horizontal. The massless rope attached to the crate makes a 22.0° angle above the surface of the ramp. The coefficients of friction between the crate and the surface of the ramp are ìk= 0.450 and" ìs= 0.650. The pulley has no appreciable mass or friction. What is the maximum weight w needed to hold this crate stationary on the ramp?

  1. 👍
  2. 👎
  3. 👁
  1. 1380N

    1. 👍
    2. 👎

Respond to this Question

First Name

Your Response

Similar Questions

  1. Physics

    A large statue in a crate is being moved. The mass of the statue and the crate is 150 kg. As the statue slides down a ramp inclined at 40.0°, the curator pushes up, parallel to the ramp’s surface, so that the crate does not

  2. Physics

    A crate is sliding down a ramp that is inclined at an angle 37.9 ° above the horizontal. The coefficient of kinetic friction between the crate and the ramp is 0.330. Find the acceleration of the moving crate.

  3. Physics

    A 1130 kg -car is being pulled up a frictionless ramp at a constant speed. The cable makes an angle of 31.0 degrees above the surface of the ramp, and the ramp itself rises at 25.0∘ above the horizontal. Find the tension in the

  4. Physics

    A child's toy consists of a block that attaches to a table with a suction cup, a spring connected to that block, a ball, and a launching ramp. (Intro 1 figure) The spring has a spring constant k, the ball has a mass m, and the

  1. Physics - Inclined Motions

    You are pushing a 53kg crate at a constant velocity up a ramp onto a truck. The ramp makes an angle of 22deg with the horizontal. If your applied force is 373N, what is then coefficient of friction between the crate and the ramp?

  2. Physics

    A crate of fruit with a mass of 37.5 kg and a specific heat capacity of 3800 J/(kg⋅K) slides 7.60 m down a ramp inclined at an angle of 38.5 degrees below the horizontal. If the crate was at rest at the top of the incline and

  3. physics

    A)A 90 kg crate is pushed at constant speed up the frictionless 34° ramp shown in the figure. What horizontal force F is required? B)What force is exerted by the ramp on the crate?

  4. Physics

    Jason works for a moving company. A 95 kg wooden crate is sitting on the wooden ramp of his truck, the ramp is angled at 11 degrees. What is the magnitude of force, directed parallel to the ramp, that he needs to get it to start

  1. Physics

    A 20.0-kg crate sits at rest at the bottom of a 13.5 m -long ramp that is inclined at 40 ∘ above the horizontal. A constant horizontal force of 290 N is applied to the crate to push it up the ramp. While the crate is moving, the

  2. Physics

    Pete slides a crate up a ramp at an angle of 20 degrees by exerting a 244 N force parallel to the ramp. The crate moves at a constant speed. The coefficient of friction is 0.19. How much work did Pete do when the crate was raised

  3. physics

    a 1300 newton crate slides 14 meters down a ramp that makes an angle of 30 degree with the horizontal. if the crate slides at a constant speed, how much thermal energy is created?

  4. physics 1401

    a 15kg crate initially at rest slides down a ramp 2m long and inclined at an angle of 20 degrees with the horizontal. If there is no friction between the ramp surface and crate, what is the velocity of the crate at the bottom of

You can view more similar questions or ask a new question.