Physics

A ball is attached to one end of a wire, the other end being fastened to the ceiling. The wire is held horizontal, and the ball is released from rest (see the drawing). It swings downward and strikes a block initially at rest on a horizontal frictionless surface. Air resistance is negligible, and the collision is elastic. The masses of the ball and block are, respectively, 1.7 kg and 2.39 kg, and the length of the wire is 1.22 m. Find the velocity (magnitude and direction) of the ball (a) just before the collision, and (b) just after the collision.

  1. 👍 0
  2. 👎 0
  3. 👁 236

Respond to this Question

First Name

Your Response

Similar Questions

  1. Physics

    A wire of 5.0m and diameter 2.0mm,extends by 0.25mm when a force of 50N was stretch it from it's end calculate a.the stress on the wire. b.the strain in the wire. c.the young's modulus of elasticity of the wire

  2. Math

    A radio antenna is stabilized by two guy wires. One guy wire is 100 m in length and is attached to the top of the antenna. The wire makes an angle of 60° with the ground. One end of the second guy wire is attached to the ground

  3. algebra

    A wire to be attached to support a telephone pole. Because of surrounding buildings, sidewalks and roadways, the wire must be anchored exactly 21 feet from the base of the pole. Telephone company workers have only 28 feet of

  4. physics

    A 4.0-m-long steel wire has a cross-sectional area of 0.050cm2. Its proportional limit has a value of 0.0016 times its Young's modulus. Its breaking stress has a value of 0.0065 times its Young's modulus. The wire is fastened at

  1. physics

    A force of 40N is applied at the end of a wire 4m long and produces an extension of 0.24mm. If the diameter of the wire is 2.00mm calculate the stress on the wire and strain in the wire. With full workings please

  2. Physics

    A 1.500m long uniform beam of mass 30.00 kg is supported by a wire as shown in the figure. The beam makes an angle of 10.00 degrees with the horizontal and the wire makes and angle of 30.00 degrees with the beam. A 50.00 kg mass,

  3. Physics

    1. A force of 40N at the end of a wire of length 4m and diameter 2mm process and extension of 0.24mm. Calculate; (a) stress on the wire (b) strain in the wire (c) Young's Modulous for the material of the wire (π=3.14)

  4. lpu

    A 100g wire is held under a tension of 250 N with one end at x = 0 and the other x = 10m. At time t = 0, pulse 1 is sent along the wire from the end at x = 10m. At time t = 30ms, pulse 2 is sent along the wire from the x = 0. At

  1. physics

    One end of a wire is attached to a ceiling, and a solid brass ball is tied to the lower end. The tension in the wire is 160 N. What is the radius of the brass ball? Well, the tension is from the brass ball, and you are given the

  2. algebra

    a piece of wire measuring 20 feet is attached to a telephone pole as a guy wire. the distance along the ground from the bottom of the pole to the end of the wire is 4 feet greater than the height where the wire is attached to the

  3. Physics

    a body of 700g hangs from the end of a long wire fixed to a high tree. A horizontal string attached to the body pulls it until the wire is at 30° to the vertical. Find the tensions in both the string and the wire

  4. Physics/Math

    A thin rod, of length L and negligible mass, that can pivot about one end to rotate in a vertical circle. A heavy ball of mass m is attached to the other end. The rod is pulled aside through an angle and released. (a)What is the

You can view more similar questions or ask a new question.