Ask questions and get helpful responses.
Ask a New Question
  1. Questions

Physics

In Figure 12-74, a uniform beam of length 11.7 m is supported by a horizontal cable and a hinge at angle θ = 52.7°. The tension in the cable is 444 N. What are (a) the x-component and (b) the y-component of the gravitational force on the beam? What are (c) the x-component and (d) the y-component of the force on the beam from the hinge?

  1. 👍
  2. 👎
  3. 👁
  4. ℹ️
  5. 🚩
Sarah

Respond to this Question

First Name

Your Response

Similar Questions

  1. physics

    An 76 kg construction worker sits down 2.0 m from the end of a 1440 kg steel beam to eat his lunch. The cable supporting the beam is rated at 15,000 N. Should the worker be worried? Determine the tension in the cable. i.imgur.

  2. physics

    A uniform horizontal beam with a length of 8m and a weight of 200N is attached to a wall by a pin connection. Its far end is supported by a cable that makes an angle of 53° with the beam (Figure below). If a 600N person stands 2m

  3. Physics

    A uniform 34.5-kg beam of length = 4.95 m is supported by a vertical rope located d = 1.20 m from its left end as in the figure below. The right end of the beam is supported by a vertical column. a) Find the tension in the rope.

  4. physics

    A uniform 8 m 1500 kg beam is hinged to a wall and supported by a thin cable attached 2 m from the free end of the beam as shown in the figure. The beam is supported at an angle of 30 degrees above the horizontal. a) free diagram

  1. Physics

    A uniform beam of length L = 8.00 m and weight 3.80 102 N is carried by two workers, Sam and Joe, as shown in the figure below. Determine the force that each person exerts on the beam.

  2. algebra

    the maximum load, v, that can be safely supported by horizontal beam varies jointly with the width of the beam ,w, and the square of its depth ,x, and inversely with the length of the beam ,a, write an equation for the constant of

  3. Physics

    A 1.500m long uniform beam of mass 30.00 kg is supported by a wire as shown in the figure. The beam makes an angle of 10.00 degrees with the horizontal and the wire makes and angle of 30.00 degrees with the beam. A 50.00 kg mass,

  4. Physics

    A uniform beam of length 1.0 m and mass 16 kg is attached to a wall by a cable that makes an angle of 30 degrees with the end of the beam, as shown in the figure. The beam is free to pivot at the point where it attaches to the

  1. AP Physics

    A floodlight with a mass of 50 kg is used to illuminate the parking lot in front of a library. The floodlight is supported at the end of a horizontal beam that is hinged to a vertical pole, as shown. A cable that makes an angle of

  2. physics

    The figure shows a uniform beam of mass m pivoted at its lower end, with a horizontal spring attached between its top end and a vertical wall. The beam makes an angle è with the horizontal. (a) Find expression for the distance d

  3. physics

    A 43 kg, 5.3-{\rm m}-long beam is supported, but not attached to, the two posts in the figure . A 23 kg boy starts walking along the beam.How close can he get to the right end of the beam without it falling over?

  4. Physics

    A uniform beam weighing Wa=1200 N is 3.50 m long and is suspended horizontally by two vertical wires at its ends, as shown in the figure below. A small but dense weight with WL = 550 N is placed on the beam 2.00m from one end, as

Still need help? You can ask a new question.