AP PHYSICS

A hydraulic lift consists of a platform that is supported by a cylindrical piston, which resides in a tube connected to a reservoir of hydraulic fluid. The piston and platform have a mass of 300 kg. The input force is generated at a smaller piston connected to the same reservoir. If the radius of the smaller piston is 2 cm, what must be the radius of the larger piston so that a moderate force of 100 N will lift a 1,700 kg car?

  1. 👍 0
  2. 👎 0
  3. 👁 231

Respond to this Question

First Name

Your Response

Similar Questions

  1. Physics

    A hydraulic lift consists of a platform that is supported by a cylindrical piston, which resides in a tube connected to a reservoir of hydraulic fluid. The piston and platform have a mass of 300 kg. The input force is generated at

    asked by Sam on December 9, 2010
  2. physics

    You are designing a hydraulic lift for an automobile garage. It will consist of two oil-filled cylindrical pipes of different diameters. A worker pushes down on a piston at one end, raising the car on a platform at the other end.

    asked by kate on February 23, 2009
  3. physics

    An automobile having a mass of 1750 kg is placed on a hydraulic lift in a garage. The piston lifting the car is 0.244 m in diameter. A mechanic attaches a pumping mechanism to a much smaller piston, 1.50 cm in diameter, which is

    asked by anonymous on June 15, 2012
  4. science

    a car weighing 15,000 N is on a hydraulic lift platform measuring 10 m squared. What is the area of the smaller piston if a force of 1,100 N is used to lift the car?

    asked by Anonymous on January 10, 2016
  5. physics

    The small piston of a hydraulic lift has a diameter of 8 cm and its large piston has a diameter of 40cm. The lift raises a load of 15,000 Newtons. A. Determine the force that must be applied to the small piston. B. Determine the

    asked by Lucy on January 6, 2015
  6. Physical science

    A hydraulic lift is used to lift a heavy machine that is pushing down on a 3.0 m2 piston A1 with a force F1 of 1200 N. What force F2 needs to be exerted on a 0.090 m2 piston A2 to lift the machine? im having problems tring to

    asked by Brandon on April 20, 2015
  7. technology

    A hydraulic lift system has an input piston with an area of 0,5 m2 and an output piston whith an area of 2 m2. What force is needes to lift a load of 1000 N?

    asked by oreneile michelle malwetse on April 29, 2015
  8. Physics

    The two pistons in a hydraulic lift have radii of 2.67 cm and 20.00 cm respectively. What force must be applied to the 2.67 cm piston so that a 2.0 x 10^3 kg mass resting on the 20.0 cm piston is lifted?

    asked by Tiffani on March 31, 2014
  9. Physics

    In a machine shop, a hydraulic lift is used to raise heavy equipment for repairs. The sys- tem has a small piston with a cross-sectional area of 0.063 m2 and a large piston with a cross-sectional area of 0.172 m2. An engine

    asked by M&M on June 28, 2013
  10. Physics

    The two pistons in a hydraulic lift have radii of 2.67 cm and 20.00 cm respectively. What force must be applied to the 2.67 cm piston so that a 2.0 x 103 kg mass resting on the 20.0 cm piston is lifted?

    asked by Tiffani on March 31, 2014

More Similar Questions