physics

A horizontal pipe contains water at a pressure of 108 kPa flowing with a speed of 1.5 m/s. The pipe narrows to one-half its original diameter. What are the speed and the pressure of the water when the pipe narrows?

  1. 👍 0
  2. 👎 0
  3. 👁 320
asked by aok

Respond to this Question

First Name

Your Response

Similar Questions

  1. Physics

    An incompressible fluid is flowing through a horizontal pipe with a constriction. The velocity of the fluid in the wide section of the pipe is 4.00 m/s and the velocity of the fluid in the narrow section of pipe is 9.00 m/s. The

    asked by Mikhail on November 10, 2013
  2. chemistry

    water is flowing at 3 m/s in a horizontal pipe under a pressure of 200 kpa. the pipe, which narrows to half its original diameter, is laid out on a level ground? a) what is the speed of flow in the narrow section? b) what is the

    asked by Arnel Comia on May 6, 2015
  3. physics

    water is flowing at 3 m/s in a horizontal pipe under a pressure of 200 kpa. the pipe, which narrows to half its original diameter, is laid out on a level ground? a) what is the speed of flow in the narrow section? b) what is the

    asked by Arnel Comia on May 6, 2015
  4. Physics

    A horizontal pipe contains water at a pressure of 120kPa flowing with a speed of 1.4m/s . The pipe narrows to one-half its original diameter. a) what is the speed of the water? b) what is the pressure of the water? I tried using

    asked by Lhaedy on December 11, 2013
  5. physics

    Water is flowing in a pipe as depicted in the figure. As shown, p = 117 kPa, d = 4.67 cm, d' = 3.06 cm, v = 4.36 m/s, and h = 1.11 m. What pressure is indicated on the upper pressure gauge? Take y = 0 at the bottom of the left

    asked by please help me on March 26, 2011
  6. science

    Water is flowing in a pipe as depicted in the figure. As shown, p = 117 kPa, d = 4.67 cm, d' = 3.06 cm, v = 4.36 m/s, and h = 1.11 m. What pressure is indicated on the upper pressure gauge? Take y = 0 at the bottom of the left

    asked by Jeantel on March 26, 2011
  7. science

    Water is flowing in a pipe as depicted in the figure. As shown, p = 113 kPa, d = 4.57 cm, d' = 3.22 cm, v = 4.40 m/s, and h = 1.25 m. What pressure is indicated on the upper pressure gauge? Take y = 0 at the bottom of the left

    asked by mican on April 18, 2014
  8. PHYSICS

    Water flowing out of a horizontal pipe emerges through a nozzle. The radius of the pipe is 1.5 cm, and the radius of the nozzle is 0.42 cm. The speed of the water in the pipe is 0.68 m/s. Treat the water as an ideal fluid, and

    asked by Anonymous on November 17, 2015
  9. Physics help please**

    A water pipe having a 2.1 cm inside diameter carries water into the basement of a house at a speed of 0.88 m/s and a pressure of 169 kPa. The pipe tapers to 1.0 cm and rises to the second floor 7.1 m above the input point. (a)

    asked by kelsey on November 24, 2008
  10. physics

    A 6.4 cm diameter horizontal pipe gradually narrows to 5.2 cm . When water flows through this pipe at a certain rate, the gauge pressure in these two sections is 30.0 kPa and 20.2 kPa , respectively

    asked by help on April 27, 2017

More Similar Questions