Chemistry

a piston performs work of 210. L atm on the surroundings, while the cylinder in which it is placed expands from 10. L to 25L. at the same time, 45J of heat is transferred from the surroundings to the system. Against what pressure was the piston working?

Please Explain!

  1. 👍
  2. 👎
  3. 👁

Respond to this Question

First Name

Your Response

Similar Questions

  1. Chemistry

    A gas is confined to a cylinder under constant atmospheric pressure, as illustrated in the following figure. When the gas undergoes a particular chemical reaction, it absorbs 827 J of heat from its surroundings and has 0.66 kJ of

  2. physics

    Please see if I am doing this problem right. A mixture of gasoline vapor and air is placed in an engine cylinder. The piston has an area of 7.4 X 10^-3 m^2 and is displaced inward by 7.2 X 10^-2 M. If 9.5 X 10^5 Pa of pressure is

  3. thermodynamic

    Energy is added to a piston-cylinder arrangement. The piston is withdrawn in such a way that the temperature remains constant. The initial pressure and volume are 200 KPa and 2m^3, respectively. If the final pressure is 100 KPa,

  4. chemistry

    The air within a piston equipped with a cylinder absorbs 570J of heat and expands from an initial volume of 0.12L to a final volume of 0.88L against an external pressure of 1.0 atm. What is the change in internal energy of the air

  1. chemistry

    A piston has an external pressure of 9.00 atm. How much work has been done if the cylinder goes from a volume of 0.130 liters to 0.500 liters? can someone explain to me how am i supposed to do this please? Thanks :D

  2. physics

    A hydraulic press has an input cylinder 1 m in diameter and an output cylinder 2 meters in diameter. Assuming 100% efficiency, find the force exerted by the output piston when a force of 10 Newtons is applied to the input piston.

  3. Thermodynamics

    3. A gas is confined in a 0.47-m-diameter cylinder by a piston, on which rests a weight. The mass of the piston and weight together is 150 kg. The atmospheric pressure is 101 kPa. (a)What is the pressure of the gas in kPa? (b) If

  4. chemistry

    Given that the normal boiling point of CCl4 is 77 °C, which of the following statements about the process below is/are correct? You may choose more than one, or none, of the statements. CCl4(l, 68 °C, 1 atm) ⟶ CCl4(g, 101 °C,

  1. physics

    A cylinder that has a 40.0 cm radius and is 50.0 cm deep is filled with air at 20.0°C and 1.00 atm. A 21.0 kg piston is now lowered into the cylinder, compressing the air trapped inside. Finally, a 79.0 kg man stands on the

  2. physics

    An ideal gas is enclosed in a cylinder with a movable piston on top of it. The piston has a mass of 8,000 g and an area of 5.00 cm2 and is free to slide up and down, keeping the pressure of the gas constant. (a) How much work is

  3. chem

    What happens during the intake stroke of a four-stroke internal combustion engine? A. The piston moves downward, creating a partial vacuum that draws in air and fuel. B. The piston moves downward as a result of the air/fuel

  4. Physics

    A cylinder is fitted with a piston, beneath which is a spring, as in the drawing. The cylinder is open at the top. Friction is absent. The spring constant of the spring is 4100 N/m. The piston has a negligible mass and a radius of

You can view more similar questions or ask a new question.