# physics

Find the static pressure that exists in your house water pipes if the water in a storage tank is 25 meters higher in elevation that your pipes.

1. 👍 0
2. 👎 0
3. 👁 64
1. The "gauge" pressure (above atmospheric) is (rho g H)
rho if the density of water (1000 kg/m^2)
H = 25 m.
You know what g is.

1. 👍 0
2. 👎 0
posted by drwls

## Similar Questions

1. ### Physics

The 3.0 cm-diameter water line splits into two 1.0cm-diameter pipes. All pipes are circular and at the same elevation. At point A, the water speed is 2.0m/s and the gauge pressure is 50kPa. What is the gauge pressure at point

asked by ana on November 17, 2009
2. ### Physics

The 3.0 -diameter water line in the figure splits into two 1.0 -diameter pipes. All pipes are circular and at the same elevation. At point A, the water speed is 2.0 and the gauge pressure is 50 .What is the gauge pressure at point

asked by Eliz on April 12, 2011
3. ### Physics

The 3.0 -diameter water line in the figure splits into two 1.0 -diameter pipes. All pipes are circular and at the same elevation. At point A, the water speed is 2.0 and the gauge pressure is 50 .What is the gauge pressure at point

asked by Eliz on April 12, 2011
4. ### physics I

A spherical reservoir that contains 4.55 105 kg of water when full. (h = 7.70 m.) The reservoir is vented to the atmosphere at the top. For a full reservoir, find the gauge pressure that the water has at the faucet in each house.

asked by Astro on December 6, 2014
5. ### physics

The 3.0 cm -diameter water line in the figure splits into two 1.0 cm -diameter pipes. All pipes are circular and at the same elevation. At point A, the water speed is 2.0 m/s and the gauge pressure is 50 kPa. What is the gauge

asked by Dr.B on March 22, 2018
6. ### phsyics

The 3.0cm-diameter water line in the figure splits into two 1.0cm -diameter pipes. All pipes are circular and at the same elevation. At point A, the water speed is 2.0 m/s and the gauge pressure is 50 kPa. What is the gauge

asked by Allison on November 15, 2010
7. ### Physics--Pressure

a house at the bottom of a hill is fed by a full tank of water 5m deep and connected to the house by a pipe that is 110m long at an angle of 58 from the horizontal. a) determine the water gauge pressure at the house b) how high

asked by lisa on March 22, 2009
8. ### Physics

How high (in meters) would the water rise in the pipes of a building if the water pressure gauge shows the pressure to be 252 kPa at ground level?

asked by Anonymous on May 22, 2016
9. ### physics

A house at the bottom of a hill is fed by a full tank of water 5.0 m deep and connected to the house by a pipe that is 110 m long at an angle of 58° from the horizontal (Fig. 13–48). (a) Determine the water gauge pressure at

asked by emy on November 6, 2013
10. ### math

water flows into a reservoir at 2000l/min. the depth of the reservoir is to be kept constant by installing some discharge pipes 1m below the surface of water in the reservoir and diameter of the pipes are 25mm. calculate the

asked by linda on September 27, 2016

More Similar Questions