chemistry

Transfer the tablet to a clean 125-mL Erlenmeyer flask. Add 10-mL of 1M NaOH and heat the mixture to a gentle boil. Once the solution has cooled to room temperature, transfer it to a 100-mL vol. flask. Using the diluted solution from the 100-mL volumetric flask, rinse a 1-mL vol. pipet with a few
drops and then pipet exactly 1.00-mL into a 50-mL volumetric flask. Fill the 50-mL volumetric flask to the mark with acidic FeCl3 solution. then fill the cuvette about 2/3 full with the solution.
aspirin weighs .300g and the concentration is .250mol/mL. How do i use the concentration to go back to find exact mass of ASA in unknown aspirin

  1. 👍
  2. 👎
  3. 👁

Respond to this Question

First Name

Your Response

Similar Questions

  1. chemistry

    Lab: Determining the Quantity of Vitamin C in Fruit Juice Vitamin C, also called ascorbic acid, is commonly found in commercial fruit juices and drinks. In this activity you will analyze data collected from a titration analysis of

  2. chemistry

    A student obtained a clean, dry, glass stoppered flask. The weight of the flask and stopper was 32.634 g. The student filled the flask with water and obtained a mass for the full stoppered flask of 59.479 g. The density of water

  3. chemistry

    Lab: Determining Ka of Acetic Acid Purpose: The purpose of this experiment is to determine the molar concentration of a sample of acetic acid and to calculate its Ka. Materials: phenolphthalein 125 mL Erlenmeyer flask 25 mL pipet

  4. Chemistry

    Can you check my answers? Thanks!!!! What would happen to the volume-to-temperature ratio if: 1. One student failed to replenish the boiling water in the boiling-water bath as the flask was being heated. At the end of the 6 min of

  1. Chemistry

    An antacid tablet weighing 1.462 grams was dissolbed in 25mL of 0.8M HCl and diluted with water. The excess HCl was titrated with 3.5 mL of 1.019M NaOH solution. 1. Calculate the number of millimoles added to the tablet 2.

  2. Physical Science

    QUESTION GIVEN---Thermal conductors don’t have to be hot to transfer heat. According to Ch.16, explain a situation when an ice cube would still transfer heat to another object it is in contact with. MY ANSWER---Because, the ice

  3. chemistry

    You weigh out an antacid tablet and determine the mass to be 1.1990 g. After taking a 0.2455 g sample of the antacid tablet, you dissolve it in 25.00 mL of a 0.1006 M solution of hydrochloric acid in a 250.0 mL Erlenmeyer flask.

  4. chemistry

    PLEASE NOTE: Titration requires several steps in order to obtain exact results. The procedures described in this lab assume that you have already done the TITRATION TUTORIAL and are familiar with the technique. 1. Prepare the NaOH

  1. chem

    quantitative determination of acetylsalicylic acid in aspirin tablets by back titration 1)why do we use a more dilute NaOH solution for the standardization of NaOH? 2)what is the rationale behind the dilution and aliquoting of the

  2. science(chem)

    I'm confused as to what to do for the calculations for my lab. Lab: Semimicroscale crystalization-erylenmyeyerflask and Hirsch Funnel Weigh 0.30g of impure sulfanilamide and then transfer to a 10ml Erlenmeyer flask. To a second

  3. Chemistry 111

    a)For the titration of an acid analyte with a NaOH titrant, a phenolphthalein endpoint will change from colorless to pink. If the "pink" resulted from perhaps only a half-drop(or less) of NaOH titrant and the Erlenmeyer flask is

  4. Chemistry

    Procedure #1 PLEASE NOTE: Titration requires several steps in order to obtain exact results. The procedures described in this lab assume that you have already done the TITRATION TUTORIAL and are familiar with the technique. 1.

You can view more similar questions or ask a new question.