# Calculus

The hemispherical tank shown is full of water. Given that water weighs 62.5 lb/ft3, find the work required to pump the water out of the tank.
----------
What is shown is just the tank (a hemisphere) with a radius of 5 ft.
----------
First I calculated the Volume of the hemisphere, V = (2/3)*pi*r^3
V = (2/3)*pi*125 = (250/3)*pi
Then I took the integral of: Volume*5y*dy from 0 to 5.
Which equals: ((250/3)*pi)*(5/2)y^2 evaluated at 5 and 0.
I came up with 16362.5 ft*lb.
----------
Am I using the wrong method?

The work required depends upon where the water is extracted. I assume you are pumping out the top.

I don't see why you claim that the energy is
Volume*5y*dy from 0 to 5

The work required is the weight of each differential slab of height dy, multiplied by the distance it must be lifted, 5 - y, integrated from 0 to 5. The area of each slab is different. It depends upon y.

1. 👍
2. 👎
3. 👁

## Similar Questions

1. ### calculus2

A tank is full of water. Find the work required to pump the water out of the spout. (Use 9.8 m/s^2 for g. Use 1000 kg/m^3 as the density of water. Assume r = 9 m and h = 3 m.) The tank is a spherical shape with r as the

A hemispherical tank with a radius of 10m is filled from an input pipe at a rate of 3m^3/min. How fast is the water level rising when the water level is 5m from the bottom of the tank? (hint: the volume of the cap of thickness of

3. ### physics

A meter stick lies on the bottom of a 100 cm long tank with its zero mark against the left edge. You look into the tank at an angle of θ = 24°, with your line of sight just grazing the upper left edge of the tank, and h = 32 cm.

4. ### Math

A rectangular tank 40cm wide by 50 cm long by 30 cm high is filled up with water up to 2/3 of its height .water flows from a tap into the tank at a rate of 0.5 liter per minute. Find the amount of water in the tank after 30

1. ### calculus

A tank is full of water. Find the work W required to pump the water out of the spout. (Use 9.8 m/s2 for g. Use 1000 kg/m3 as the weight density of water. Assume that a = 4 m, b = 4 m, c = 18 m, and d = 2 m.) W= ? j

2. ### Calculus

The tank shown is full of water. Given that water weighs 62.5 lb/ft3, find the work required to pump the water out of the tank. The tank shown is a hemisphere with r = 5 ft. The water is to be pumped out at the top. First I solved

3. ### Calculus

A tank in the shape of a right circular cylinder is filled with water (62.5 lb/ft3). It has a height of 8 ft and a diameter of 10 ft. How much work is required to pump all the water to a spout that is 3 ft above the top of the

4. ### Calculus

A tank is full of water. Find the work required to pump the water out of the spout. Use the fact that water weighs 62.5 lb/ft3. (Assume a = 8 ft, b = 14 ft, and c = 15 ft.)

1. ### calculus

1. Find the volume V of the solid obtained by rotating the region bounded by the given curves about the specified line. y = ln(5x), y = 1, y = 3, x = 0; about the y-axis 2. Use the method of cylindrical shells to find the volume V

2. ### Mathematics

A hemispherical tank of diameter, 10m, is filled by water issuing from a pipe of radius 20cm at 2m per second. Calculate, correct to three significant figures, the time, in minutes it takes to fill the tank.

3. ### Physics II

A large cylindrical water tank 11.5 m in diameter and 13.5 m tall is supported 8.75 m above the ground by a stand. The water level in the tank is 10.6 m deep. The density of the water in the tank is 1.00 g/cm3. A very small hole

4. ### Maths

A hemispherical tank of diameter 10cm is filled by water issuing from a pipe of radius 20cm at 2m per second . Calculate , correct to three significant figures in minutes it takes to fill the tank