# physics

A reel has radius R and moment of inertia I. The reel is positioned at the top of a slope and a block is also on the slope with some angle theta. One end of the block of mass m is connected to a spring of force constant k, and the other end is fastened to a cord wrapped around the reel. The reel axle and the incline are frictionless. The reel is wound counterclockwise so that the spring stretches a distance d from its unstretched position and is then released from rest.

Find the angular speed of the reel when the spring is again unstretched. (Answer using theta for è, g for the acceleration due to gravity, and R, I, m, k, and d, as necessary.)

((2mgsin(theta)-kd^2)/I)^(1/2) is what I got when I tried to solve it, but it's not right. I started with mgsin(theta) = (1/2)kd^2 + (1/2)Iw^2 to get there. Where did I go wrong?

1. 👍 0
2. 👎 0
3. 👁 54
asked by mightymouse

## Similar Questions

1. ### PHYSICS

A 15 M LENGTH OF HOSE IS WOUND AROUND A REEL WHICH IS INITIALLY AT REST. THE MOMENT OF INERTIA OF THE REEL OF 0.44KGM^2 AND ITS RADIUS IS 0.160M. WHEN THE REEL IS TURNING FRICTION AT THE AXLE EXERTS A TORQUE OF MAGNITUDE 3.40NM ON

asked by kassy on November 9, 2016
2. ### physics

A 15.5-m length of hose is wound around a reel, which is initially at rest. The moment of inertia of the reel is 0.42 kg · m2, and its radius is 0.170 m. When the reel is turning, friction at the axle exerts a torque of magnitude

asked by valem on April 8, 2011
3. ### Physics

A 13.6-m length of hose is wound around a reel, which is initially at rest. The moment of inertia of the reel is 0.40 kg · m2, and its radius is 0.151 m. When the reel is turning, friction at the axle exerts a torque of magnitude

asked by Elizabeth on November 16, 2012
4. ### Physics

A 13.6-m length of hose is wound around a reel, which is initially at rest. The moment of inertia of the reel is 0.40 kg · m2, and its radius is 0.151 m. When the reel is turning, friction at the axle exerts a torque of magnitude

asked by Elizabeth on November 15, 2012
5. ### physics

A fish takes the bait and pulls on the line with a force of 2.7 N. The fishing reel, which rotates without friction, is a cylinder of radius 0.048 m and mass 0.76 kg. (a) What is the angular acceleration of the fishing reel? ?

asked by kelsey on October 23, 2008
6. ### physics

A fish takes the bait and pulls on the line with a force of 2.6 N. The fishing reel, which has a friction clutch that exerts a restraining torque of 0.043 N*m, is a cylinder of radius 0.055 m and mass 0.81 kg. A)What is the

asked by Kyle on March 29, 2010
7. ### Physics

A fish takes the bait and pulls on the line with a force of 2.2 N. The fishing reel, which has a friction clutch that exerts a restraining torque of 0.048 N m, is a cylinder of radius 0.055 m and mass 0.84 kg. Part A What is the

asked by Cooper on November 3, 2011
8. ### physics

A cylindrical ﬁshing reel has a mass of 0.899 kg and a radius of 5.21 cm. A friction clutch in the reel exerts a restraining torque of 1.43 N · m if a ﬁsh pulls on the line. The ﬁsherman gets a bite, and the reel begins to

asked by Jared on November 27, 2012
9. ### Physics

On an open-reel tape deck, the tape is being pulled past the playback head at a constant linear speed of 0.372 m/s. (a) If the radius of the film taken up so far (as shown in the upper part of the drawing) is 0.0576 m, find the

asked by Jordan on October 25, 2010
10. ### Physics

A cylindrical 7.00-kg reel with a radius of 0.60 m and a frictionless axle, starts from rest and speeds up uniformly as a 3.00-kg bucket falls into a well, making a light rope unwind from the reel (Fig. P8.36). The bucket starts

asked by Julia on April 11, 2012

More Similar Questions