chemistry

Boron, germanium, aluminum, silicon and antimony are all semimetals right?
or am i wrong on this?

i don't think aluminum. Antimony, aresenic, boron, germanium, selenium, silicon, tellurium. double check though.

  1. 👍 0
  2. 👎 0
  3. 👁 66

Respond to this Question

First Name

Your Response

Similar Questions

  1. Basic Engineering2. Materials Science

    Boron is used to dope 1 kg of germanium (Ge). How much boron (B) is required to establish a charge carrier density of 3.091e7/cm^3. One mole of germanium has a volume of 13.57 cm^3 and weighs 72.61 gram. Give answer in grams of

    asked by Ray on December 4, 2012
  2. Maths-Help

    A silicon ingot, which should contain 10^16 boron atoms/cm3, is to be grown by the Czochralski technique. What concentration of boron atoms should be in the melt to give the required concentration in the ingot ? If the initial

    asked by Shawn on August 11, 2013
  3. solid chem

    A p-n junction is obtained at a depth of 3 x 10-3 cm below the surface by diffusion of antimony (Sb) into p-type germanium. What is the donor concentration in the bulk germanium if the diffusion is carried out for three hours at

    asked by solid chem on November 15, 2013
  4. solid chem

    A p-n junction is obtained at a depth of 3 x 10-3 cm below the surface by diffusion of antimony (Sb) into p-type germanium. What is the donor concentration in the bulk germanium if the diffusion is carried out for three hours at

    asked by solid chem on November 15, 2013
  5. chemistry

    A p-n junction is obtained at a depth of 3 x 10-3 cm below the surface by diffusion of antimony (Sb) into p-type germanium. What is the donor concentration in the bulk germanium if the diffusion is carried out for three hours at

    asked by abc on November 17, 2013
  6. solid chemestry

    A p-n junction is obtained at a depth of 3 x 10-3 cm below the surface by diffusion of antimony (Sb) into p-type germanium. What is the donor concentration in the bulk germanium if the diffusion is carried out for three hours at

    asked by Anonymous on November 15, 2013
  7. Chemistry

    If 200 g. of an unknown metal oxide, M2O3, upon reaction with chlorine yields 376 g of M2Cl2, then the metal M is: a. Indium b. Aluminum c. Gallium d. Silicon e. boron

    asked by Kamila on May 5, 2011
  8. Science

    “Strained silicon” technology is a technique where a silicon thin film is deposited onto a silicon-germanium (SiGe) film. Both Si and SiGe have the same crystal structure, but the lattice parameter of SiGe is larger than that

    asked by Taylor on April 24, 2017
  9. Chemistry

    1)Naturally occuring boron is made up of 20% by mass of 10B isotope and 80% by mass of 11B isotope.Calculate the relative atomic mass of boron. (2)Natural Silicon containing ores contains 92% of 28Si, 5% of 29Si and 3% of

    asked by PEACE on March 28, 2016
  10. Physics

    Wat is d bond between silicon and germanium

    asked by Mei on April 28, 2013

More Similar Questions