Now suppose that the PV module mentioned above is set up using a series connection of solar cells with the above mentioned specifications. Two of the solar cells have gone faulty (completely stop generating power), but fortunately you have bypass diodes connected across the faulty solar cells. Assume that the bypass diodes are ideal (they have a zero voltage drop when conducting).

What is the measured open-circuit voltage (in V ) of the above PV module with the faulty solar cells?

  1. 👍
  2. 👎
  3. 👁
  1. No specifications. Cannot copy and paste here.

    1. 👍
    2. 👎

Respond to this Question

First Name

Your Response

Similar Questions

  1. Sets

    Suppose Set B contains 69 elements and the total number elements in either Set A or Set B is 107. If the Sets A and B have 13 elements in common, how many elements are contained in set A?

  2. Chemistry

    The energy levels of one-electron ions are given by the equation: En=(-2.18*10^(-18)J)(Z^2/n^2) The series in the He spectrum that corresponds to the set of transitions where the electron falls from a higher level to the nf = 4

  3. Social Studies

    what is the connection among sectionalism, slavery, and states rights as causes of the Civil War? How did the southern response to the 1860 election results demonstrate this connection? Could someone help me with this and explain

  4. history

    10. What is the connection among sectionalism, slavery, and states’ rights as causes of the Civil War? How did the Southern response to the 1860 election results demonstrate this connection?

  1. Algebra

    1. Choose the correct solution in roster form. N is the set of natural numbers that are factors of 12. {1, 2, 3, 4, 6} {1, 2, 3, 4, 6, 12} {1, 2, 3, 4, 5, 6, 8, 12} *this is my answer {1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 12} 2. Write

  2. college

    What will the following pseudocode program display? Module main( ) Declare Integer x = 1 Declare Real y = 3.4 Display x, " ", y Call changeUs(x, y) Display x, " ", y End Module Module changeUs(Integer a, Real b) { Set a = 0 Set b

  3. Is My Pseudocode Correct? - Programming

    I am supposed to make a pseudocode for a fat gram calculator. These are the instructions: Design a program that asks for the number of fat grams and calories in a food item. Validate the input as follows: - Make sure the number of

  4. Physics

    A given solar cell has the following specifications: Isc=4A Voc=0.7V 36 identical cells with the above specifications are to be interconnected to create a PV module. 1- What is the open-circuit voltage (in V) of the PV module if

  1. Solar Energy

    With respect to a PV module's I-V and P-V curves, and the module's operating point, consider the following statements: a) When the operating point of the PV module is on the MPP (maximum power point), \(P_{mpp} \lt V_{oc} \times

  2. Solar Energy

    Consider a PV module with the following parameters as measured at STC (Standard Testing Conditions): Voc = 55 V; Isc = 5 A; Impp = 4.7 A; Fill Factor = FF = 75% ; Efficiency = 19.75%. Suppose that under normal operation at STC

  3. Solar Energy

    Consider a 250 Wp rated crystalline silicon PV module. It results from a manufacturing process that consumes 8kWh/Wp of PV module. a) What is the total energy consumed (in kWh) during the production of the module? Assume that the

  4. physics

    1.) Draw a set of 1.5-volt cells in a series circuit so that the total battery voltage is 9 volts. A.) how many cell does it take? B.) show polarity connection. C.) suppose you connected one of the cells in part (a) so that it was

You can view more similar questions or ask a new question.