a remote controlled car's wheel accelerates at 22.4 rad/s^2. if the wheel begins with an angular speed of 10.8 rad/s what is the wheel's angular speed after exactly 3 full turns?

  1. 👍
  2. 👎
  3. 👁
  1. 3 full turns is 6 pi radians.
    Call the angular speed at the end of 3 turns w(3).
    The three turns require time T, where
    w(3) = 10.8 + 22.4*T
    [w(3)+ 10.8]*T/2 = 6 pi

    T = 12 pi/[w(3)+ 10.8]
    = [w(3)-10.8]/22.4
    w(3)^2 - (10.8)^2 = 22.4*(12 pi)
    Solve for w(3)

    1. 👍
    2. 👎

Respond to this Question

First Name

Your Response

Similar Questions

  1. physics

    A 4.50-kg wheel that is 34.5 cm in diameter rotates through an angle of 13.8 rad as it slows down uniformly from 22.0 rad/s to 13.5 rad/s. What is the magnitude of the angular acceleration of the wheel? A) 0.616 rad/s 2 B) 22.5

  2. physics

    A small rubber wheel is used to drive a large pottery wheel, and they are mounted so that their circular edges touch. The small wheel has a radius of 1.7 cm and accelerates at the rate of 6.9 rad/s^2, and it is in contact with the

  3. physics

    The flywheel of a steam engine begins to rotate from rest with a constant angular acceleration of 1.45 rad/s2. It accelerates for 29.5 s, then maintains a constant angular velocity. Calculate the total angle through which the

  4. physics

    a wheel is rotating at 30 rev/min. The angular velocity of the wheel is a. 2pi^2 rad/s b. 2pi rad/s c. 2 rad/s d. pi/2 rad/s e. pi rad/s explain please!

  1. Physics 1 (Calc Based)

    At t = 0, a wheel rotating about a fixed axis at a constant angular acceleration of –0.40 rad/s^2 has an angular velocity of 1.5 rad/s and an angular position of 2.3 rad. What is the angular position of the wheel at t = 2.0 s?

  2. Physics

    An electric motor rotating a workshop grinding wheel at a rate of 95 rev/min is switched off. Assume the wheel has a constant negative angular acceleration of magnitude 2.40 rad/s2. (a) How long does it take for the grinding wheel

  3. Physics!

    A wheel rotates with a constant angular acceleration of 3.50 rad/s2. The angular speed of the wheel is 2.00 rad/s at t = 0. If the radius of the wheel is doubled, Are the following statements affected? If so, in what way? (Select

  4. Physics

    A Ferris wheel, rotating initially at an angular speed of 0.500 rad/s, accelerates over a 7.00-s interval at a rate of 0.04 rad/s^2. What angular displacement does the Ferris wheel undergo in this 7-s interval?

  1. physics

    As a result of friction, the angular speed of a wheel changes with time according to d(theta)/dt = w0 e^-(aplpha*t) where w0 and alpha are constants. The angular speed changes from an initial angular speed of 4.87 rad/s to 4.27

  2. physics

    A rotating wheel requires 7.00 s to rotate 28.0 revolutions. Its angular velocity at the end of the 7.00-s interval is 97.0 rad/s. What is the constant angular acceleration (in rad/s) of the wheel? rad/s2

  3. Physics... rotation

    A constant force of 40 N is applied tangentially to the rim of a wheel with 20 cm radius. The wheel has a moment of inertia of 30 kg m2. Show that the angular acceleration of the wheel is 0.27 rad s-2

  4. Physics

    A spinning wheel is slowed down by a brake, giving it a constant angular acceleration of −4.60 rad/s2. During a 2.60-s time interval, the wheel rotates through 85.4 rad. What is the angular speed of the wheel at the end of the

You can view more similar questions or ask a new question.