# ..physics.

At 20.0 C, an alumium ring has an inner diameter of 5.0000 cm and a brass rod has a diameter of 5.0500 cm.
a. If only the ring is heated, what temperature must it reach so that it will just slip over the rod?
b. WHAT IF? If both are heated together, what temperature must they both reach so that the ring just slips over the rod? Would the latter process work?

sorry., this one i really couldn't figure out. although the last 2 i got it after awhile.

calculate the circumference of the rod.

Calculate the difference in the circumerance of the ring and the rod.

a) LEt that be delta L

deltaL= Ringcirc*coeffAl*deltaT
solve for delta T.

b) for each, the original material Circumer + delta L is equal to the sum of L and delta L for the other.

aluminumcirc=rodcirc
but the rod expands, it has a delta V. So the delta L for it has to be determined by changes in V.

Volume= 4/3 PI r^3
dV= 4 PI r^2 dr= V(coefficientvolume)deltaT
or
dr= V*coeffV*deltaTemp/4PIr^2 where r is the original r. And
newCircumference= 2PI (r + dr)

Now, set the aluminum length heated equal to the brass change in circumference.

Solve for deltaTemp.

so i figured out the first part
but im still lost about part b

1. 👍 0
2. 👎 0
3. 👁 679

## Similar Questions

1. ### Physics

You have a brass ring of inside diameter 10.00 cm that is at 20.0oC. You want to slip this ring over an aluminum rod that is at 20.0oC and has a diameter of 10.01 cm. a. To what temperature do you have to heat the ring to slip it

asked by David on December 4, 2014
2. ### physics

At 20 degrees C an aluminum ring has an inner diameter of 5.000 cm, and a brass rod has a diameter of 5.050 cm. Keeping the brass rod at 20°C, which of the following temperatures of the ring will allow the ring to just slip over

asked by Anonymous on July 31, 2011
3. ### physics

A steel rod is 3cm in diameter at 25C. A brass ring has an interior diameter hole of 2.994cm at 25C. At what common temp will the ring just slide onto the rod? alpha(steel)- 11x10^-6 alpha(brass)= 19x10^-6

asked by key on September 4, 2013
4. ### Physics

A brass plug is to be placed in a ring made of iron. At 20 degrees Celsius, the diameter of the plug is 8.737 cm and that of the inside of the ring is 8.723 cm. They must both be brought to what common temperature in order to fit?

asked by Phil on November 16, 2010
5. ### Physics

An iron ball of diameter 15.23cm rests on a brass ring of internal diameter 15.0cm at a temperature of 20 degrees celsius. To what temperature must both be heated for the ball to pass through the ring?

asked by Onyi on November 29, 2016
6. ### physics

A brass ring of diameter 10.00 cm at 22.2°C is heated and slipped over an aluminum rod of diameter 10.01 cm at 22.2°C. Assume the average coefficients of linear expansion are constant. (b) What if the aluminum rod were 9.16 cm

asked by niti on April 5, 2014
7. ### Physics

A thin brass ring of inner diameter 10cm at 20degrees C is warmed and slipped over an aluminum rod of diameter 10.01cm at 20degrees C. Assuming the average coefficient of linear expansions are constant, to what temperature must

asked by Sandhya on April 15, 2009
8. ### Physics

A man's gold wedding ring has an inner diameter of 2.0cm at 30∘C. Part A If the ring is dropped into boiling water, what will be the change in the inner diameter of the ring?

asked by Help! final next weel on December 3, 2013
9. ### Science

sample of alumium has a mass 6.3g.calculate the number of mole of alumium present and the number of atom of alumium in the sample(AL=27

asked by Gchjfe on February 8, 2018
10. ### Chemistry

sample of alumium has a mass 6.3g.calculate the number of mole of alumium present and the number of atom of alumium in the sample(AL=27

asked by Hassan on January 16, 2016

More Similar Questions