statistics2

A textbook publisher wants to determine process control charts for the textbook height. The following table shows the first 20 samples of n=4 sample size of the production of the text.

Sample - X Bar - Range
1 - 10.01 - .01
2 - 9.97 - .04
3 - 9.98 - .03
4 - 10.01 - .04
5 - 10.00 - .04
6 - 10.01 - .02
7 - 10.04 - .04
8 - 9.99 - .07
9 - 9.95 - .04
10 - 9.99 - .06
11 - 10.02 - .03
12 - 10.01 - .04
13 - 10.04 - .02
14 - 9.95 - .02
15 - 10.04 - .01
16 - 9.99 - .04
17 - 10.04 - .03
18 - 10.04 - .06
19 - 10.04 - .07
20 - 10.02 - .06

What are the upper and lower control limits for the X bar chart using the data from the samples above?

What are the upper and lower control limits for the R chart using the data from the samples above?

Discuss the charts you have plotted. What conclusions and recommendations do you make from those charts and the data?

asked by Johnny

Respond to this Question

First Name

Your Response

Similar Questions

  1. internationa business operations management

    As the production manager for an electronic circuit company you have encountered the following situation. Part 1 A process for producing electronic circuits has achieved very high yield levels. An average of only 10 defective
  2. Math

    A process for producing electronic circuits has achieved very high yield levels. An average of only 10 defective parts per million is currently produced. 1. What are the upper and lower control limits for a sample size of 100? 2.
  3. college

    A process for producing electronic circuits has achieved very high yield levels. An average of only 10 defective parts per million is currently produced. 1. What are the upper and lower control limits for a sample size of 100? 2.
  4. business

    MGT635-1003B-04 International Business Operations Management Assignment Name: Unit 5 Individual Project Deliverable Length: 6-7 body pages Details: As the production manager for an electronic circuit company you have encountered
  5. Operations Management

    Twelve samples, each containing five parts, were taken from a process that produces steel rods. The length of each rod in the samples was determined. The results were tabulated and sample means and ranges were computed. The
  6. business statistics

    Samples of 12-volt batteries are taken at 30-minute intervals during a production run. Each sample consists of three batteries, and a technician records how long each battery will produce 400 amperes during a standard test. Given
  7. business statistics

    Please can you give me the step to do this exercise? Thank you Samples of 12-volt batteries are taken at 30-minute intervals during a production run. Each sample consists of 3 batteries, and a technician records how long each
  8. Business

    The average light output for a domestic bulb is 80 lumens with a range of 4 lumens when process is in control. Sample size is 6. What are the CL, UCL and LCL for the X-Bar and R charts?
  9. Probabability

    You are in charge of quality control on a line which fills bottles of soda. The desired gross weight for a 2 liter bottle of soda is 2,160 grams. At the end of each shift you select 12 bottles at random and weigh them. After one
  10. operations management

    A critical dimension of the service quality of a call center is the wait time of a caller to get to a sales representative. Periodically, random samples of 6 customer calls are measured for time. Results from the last five samples

More Similar Questions