Questions LLC
Login
or
Sign Up
Ask a New Question
Science
Physics
What is the force needed to start a 100 kg block sliding on a horizontal if the coefficients for static and kinetic are 0.75 and 0.5
1 answer
0.75 * 100 * g ... g = 9.8 m/s^2
You can
ask a new question
or
answer this question
.
Related Questions
a force F is applied in horizontal to a 10kg block. the block moves at a constant speed 2m/s across a horizontal surface. the
A block of mass 11 kg is at rest on a rough plane inclined at 30° to the horizontal. A force acts on the block in a direction
a dockworker applies a constant horizontal force of 80 N to a block of ice on a smooth horizontal floor. The friction force is
Ohmygoodness, I am not having a good time tonight.
"A 5.2kg block sliding at 9.4 m/s across a horizontal frictionless surface
A horizontal force of 100 N pushes a 12kg block up a frictionless incline that makes an angle 25degrees with the horizontal.
the block is acted upon by its W=200 lb, a horizontal force Q=600 lb, and the pressure P exerted by the inclined plane. The
A horizontal force, F1 = 85 N, and a force, F2 = 18.4 N acting at an angle of θ to the horizontal, are applied to a block of
The horizontal surface on which the block of mass 4 kg slides is frictionless. The force of 30N acts on the block in a
A 2.00 kg block, on a horizontal surface with coefficient of static friction 0.900, is pushed by a force that is directed down
If the co-efficient of static friction for a 5 kg rubber block is 0.3 how much more force is required to lift the block than to
