# Chemistry

when pure sodium hydroxide is dissolved in water , heat is evolved in a laboratory experiment measure a molar heat of solution of sodium hydroxide the following procedure was followed. to a calorimeter containing 300g of water at 20.0 C and 10.65g of NaOH also at 20.0 C was added. the temperature change which was monitered by digital probe with neglible heat capacity stopped when it reached a temperature of 28.50C if the specific heat of the mixture is 4.184Jg-1c-1 and the small heat capacity of the calorimeter is ignored what is Delta H for the solution of one moleof NaOH? the molar mass of NaOH is 40.09.

Compute the heat generated, Q, using the temperature rise and the mass M and heat capacity C of H2O.
Q = M C (delta T)
delta t is the 8.50 C change in temperature.
Divide Q by the number of moles of NaOH to get the deltaH per mole.

heat of solution is
massH2O*specificheatwater*deltaTH2O =
300g*4.184*(28.50-20.0) = ??joules.

??joules is the heat for 10.65g NaOH.
Convert to ?? joules/40.09 mol.
This is the heat of solution/mol NaOH.
Post your work if you get stuck.

1. 👍
2. 👎
3. 👁
1. 260

1. 👍
2. 👎
2. usthe following data of the results of a titration with potassium hydroxide (KOH),calculate the concentration of sulfuric (H2SO4.
Burette reading from the titration of 20.0 ml of sulfuric acid with potassium hydroxide
TRIAL INITIAL VOLUME(ML) FINALVOLUME(ML)
1 0.0 23.0
2 23.0 47.0
3 0.0 2305

1. 👍
2. 👎

## Similar Questions

1. ### Chemistry

Pure water and Sodium chloride are both poor conductors of electricity by themselves. However, if sodium chloride crystals are dissolved into the water the solution becomes a good conductor of electricity. How does this phenomenon

2. ### chemistry

KCl(s) → K+(aq) + Cl‾ (aq) Solid KCl dissolves as shown in the above equation. A 6.60 g sample of KCl was dissolved in 42.3 g of water. The initial temperature of the water was 21.90°C. After the compound dissolved, the

3. ### Chemistry

How many joules are required to raise the temperature of 450mL of water from 30 °C to 100 °C? The specific heat of copper metal is 0.385 J/ g- K. How many KJ of heat needed to raise the temperature of 1.1 kg block of copper from

4. ### chemistry

Consider the following reaction: 2H2 (g) + O2 (g)  2H2O (l) ΔH = -572 kJ a. How much heat is evolved for the production of 1.00 mol H2O (l)? b. How much heat is evolved when 4.03 g hydrogen is reacted with excess oxygen? c.

1. ### chemistry

The reaction between sodium hydroxide and hydrobromic acid is represented in the equation below: OH- + H+ -> H2O A 62.5 mL sample of 1.86 M NaOH at 22.5 deg Celsius was mixed with 62.5 mL sample of 1.86 M of HBr at 22.5 deg

2. ### Chemistry

Magnesium sulfate is often used it first aid hot-packs giving off heat when dissolved in water. When 2.00 g of MgSO4 dissolves in 15.0 mL of water (d= 1.00g/mL) at 25.0ºC, 1.51 kJ of heat is evolved. A) Write the balanced

3. ### Chemistry

A chemistry student needs to standardize a fresh solution of sodium hydroxide. She carefully weighs out 338.mg of oxalic acid H2C2O4 , a diprotic acid that can be purchased inexpensively in high purity, and dissolves it in 250.mL

4. ### Chemistry

Complete and balance the following neutralization reactions. then, write the names of all the reactants and all the products in each chemical reaction. A) HNO3 + Al(OH)3 = 3HNO3 + Al(OH)3 -> Al(NO3)3 + 3H2O Reactants: Nitric acid,

1. ### Chemistry

When 2.25 g of sodium hydroxide (NaOH) was dissolved in 150.00 g of water a value of 11.00oC was obtained for ΔT. 1. Calculate the molarity of the sodium hydroxide solution. 2. Calculate the value (calories) for the heat of

2. ### chemistry

In the reaction between formic acid (HCHO2) and sodium hydroxide, water and sodium formate (NaCHO2) are formed. To determine the heat of reaction, 75.0 mL of 1.07 M HCHO2 was placed in a coffee cup calorimeter at a temperature of

3. ### ap chemistry!! help!!

some solutes have large heats of solution, and care should be taken in preparing solutions of these substances. The heat evolved when sodium hydroxide dissolves is 44.5 KJ/mol. What is the final temperature of the water,

4. ### chemistry

Pure water and sodium chloride crystals are both poor conductors of electricity by themselves. However, if sodium chloride crystals are dissolved in pure water, the solution becomes a good conductor of electricity. How does this