Chemistry

A fixed amount of oxygen gas is held in a .500 L tank at a pressure of 4.09 atm. The tank is connected to an empty 1.50 L tank by a tube with a valve. After this valve has been opened and the oxygen is allowed to flow freely between the two tanks at a constant temperature, what is the final pressure in the system?

  1. 👍 0
  2. 👎 0
  3. 👁 273
  1. Please don't change you screen name. It makes is difficult to know how to answer your question the best way.
    Use p1v1 = p2v2
    v1 is 0.5L
    v2 is 2.0 L

    1. 👍 0
    2. 👎 0

Respond to this Question

First Name

Your Response

Similar Questions

  1. physic

    a tank contains 26.0 kg of oxygen gas at a gauge pressure of 8.70 atm. if oxygen is replaced by helium, how many kilograms of the latter will be needed to produce a gauge pressure at 7.00 atm?

  2. Physics

    The pressure gauge on a tank registers the gauge pressure, which is the difference between the interior and exterior pressure. When the tank is full of oxygen (O2), it contains 9.00 kg of the gas at a gauge pressure of 40.0 atm.

  3. chemistry

    Mixtures of helium and oxygen are used in scuba diving tanks to help prevent ‘the bends’, a condition caused by nitrogen bubbles forming in the bloodstream. If 95 L of oxygen and 25 L of helium at STP are pumped into a scuba

  4. Chemistry

    Imagine that you have a 7.00L gas tank and a 3.50L gas tank. You need to fill one tank with oxygen and the other with acetylene to use in conjunction with your welding torch. If you fill the larger tank with oxygen to a pressure

  1. Chemistry

    Imagine that you have a 6.00L gas tank and a 3.00L gas tank. You need to fill one tank with oxygen and the other with acetylene to use in conjunction with your welding torch. If you fill the larger tank with oxygen to a pressure

  2. Physics

    A 20-cm-diameter cylinder that is 40 cm long contains 50 g of oxygen gas at 20C. What is the number density of the oxygen? in m^-3 What is the reading of a pressure gauge attached to the tank? in kPa

  3. chemistry

    a 500ml sample of oxygen gas at 24 degree celsius was prepared by decomposing a 3% aqueous soution of hydrogen peroxide in the presence of manganese catalyst by the reaction: 2h2o2 = 2 h20 + o2... the oxygen was colletec by

  4. sciencee

    1. What pressure would be needed to compress 25.1 mL of hydrogen at 1.01 atm to 25% of its original volume? 2. If the pressure on a 1.04-L sample of gas is doubled at constant temperature, what will be the new volume of the gas?

  1. Chemistry

    Could some please tell me if I did this problem correctly? Assume that at a given temperature, there is 1 g of CO2 gas in a one liter volume. How much mass of O2 would there be at the same temperature, in the same volume? My

  2. Physics

    A metal tank with volume 3.10 L will burst if the pressure of the gas it contains exceeds 100 atm. (a) If 11.0 mol of an ideal gas is put into the tank at a temperature of 23.00C, to what temperature can the gas be warmed before

  3. chemistry

    Consider a 50 L tank which hold 20 g of hydrogen gas, 20 g of carbon dioxide gas, and 20 g of krypton gas, at a total pressure of 600 KPa. 1. which gas has the largest partial pressure? 2. Which gas the smallest average speed? 3.

  4. chem 102

    Use Henry's law and the solubilities given below to calculate the total volume of nitrogen and oxygen gas that should bubble out of 1.1L of water upon warming from 25 ∘C to 50 ∘C. Assume that the water is initially saturated

You can view more similar questions or ask a new question.