I need help with this problem.

A ceiling fan is turned on and a net torque of 2.0 Nm is applied to the blades. The blades have a total moment of inertia of 0.24 kgm2. What is the angular acceleration of the blades in rad/s2?

The formula is well known:

Torque= momentof inertia* angular acceleration.

  1. 👍
  2. 👎
  3. 👁

Respond to this Question

First Name

Your Response

Similar Questions

  1. Physics

    A wheel with rotational inertia I is mounted on a fixed, fricitonless axle. The angular speed w of the wheel is inccreased from zero to w_f in a time interval T. 1: What is the average net torque on the wheel during the time

  2. physics class-Help!!!

    A 3.0 m rod is pivoted about its left end.A force of 6.0 N is applied perpendicular to the rod at a distance of 1.2 m from the pivot causing a ccw torque, and a force of 5.2 is applied at the end of the rod 3.0 m from the pivot.

  3. Physic (concepts-please check my thoughts)

    A net torque applied to a rigid object always tends to produce? a)translational acceleration b) rotational equilibrium c) rotational acceleration d) rotational inertia e) none of these work (c) Torque produces torsion and tends to

  4. Physics university

    In a tennis match, a player wins a point by hitting the ball sharply to the ground on the opponent's side of the net. If the ball bounces upward from the ground with a speed of 17 m/s , and is caught by a fan in the stands with a

  1. Physics

    A lever is 5m long. The distance from fulcrum to the weight to be lifted is 1m. If the worker pushes on the opposite end with 400N, what is the max weight that can be lifted? l=5m h=1m F=400N F_g=? torque=F_g*l I first must find

  2. Please check solution

    A uniform solid disk with a mass of 40.3 kg and a radius of 0.454 m is free to rotate about a frictionless axle. Forces of 90.0 N and 125 N are applied to the disk (a) What is the net torque produced by the two forces? (Assume

  3. physics

    1.Can a small child play with a fat child onthe see-saw?explain how. 2.Two children are sitting on the see-saw,such that they can not swing.What is the net torque in this situation? 3.Does the speed of a ceiling fan go on

  4. Physics

    A long, thin rod is cut into two pieces, one being twice as long as the other. To the midpoint of piece A (the longer piece), piece B is attached perpendicularly, in order to form the inverted “T” shown in the drawing. The

  1. Thermo engineering

    The driveshaft of a building’s air-handling fan is turned at 300 RPM by a belt running on a 0.3-m-diameter pulley. The net force applied by the belt on the pulley is 2000 N. determine the torque applied by the belt on the

  2. Physics

    A uniform disk with mass m = 8.54 kg and radius R = 1.35 m lies in the x-y plane and centered at the origin. Three forces act in the +y-direction on the disk: 1) a force 333 N at the edge of the disk on the +x-axis, 2) a force 333

  3. Physics

    A 3.0-m rod is pivoted about its left end. A force of 6.0 N is applied perpendicular to the rod at a distance of 1.2m from the pivot causing a CCW torque, and a force of 5.2N is applied at the end of the rod 3.0m from the pivot.

  4. Physics

    The blades of a ceiling fan have a radius of 0.348 m and are rotating about a fixed axis with an angular velocity of +1.63 rad/s. When the switch on the fan is turned to a higher speed, the blades acquire an angular acceleration

You can view more similar questions or ask a new question.