# physics -damon help

An ac source of 50v,100÷πHz is connected in
series with an inductor of inductance L ad a
resistor of resistance R.the current in the circuit
is 2A ad p.d. across L and R are 30v ad 40v
respectively
1) calc d average power dissipated 2) calc d power factor in the circuit

1. 👍 0
2. 👎 0
3. 👁 221
1. 1. The resistance of the inductor is assumed to be zero.
P = Vr*I = 40 * 2 = 80 Watts.

2. pf = Cos A = Vr/E = 40/50 = 0.8.

1. 👍 0
2. 👎 0

## Similar Questions

1. ### physics

A 30 ohm resistor is connected in parallel with a variable resistance R. The parallel combination is then connected in series with a 6 ohm resistor and connected across a 120 V source. Find the minimum value of R if the power

asked by Oscar on March 25, 2017
2. ### physics

An AC voltage of the form Δv = (100 V) sin(1000t) is applied to a series RLC circuit. Assume the resistance is 400 , the capacitance is 4.60 µF, and the inductance is 0.500 H. Find the average power delivered to the circuit. W

asked by chan on December 2, 2013
3. ### Physics!!!

A 24-V battery is connected in series with a resistor and an inductor, with R = 5.6 Ω and L = 2.0 H, respectively. (a) Find the energy stored in the inductor when the current reaches its maximum value. (b) Find the energy stored

asked by Help on February 27, 2012
4. ### Physics

A 120-V rms voltage at 60.0 Hz is applied across an inductor, capacitor and a 100-Ω resistor in series. If the maximum value of the current in this circuit is 1.60 A, what is the rms value of the current in this circuit?

asked by Lewis on August 7, 2016
5. ### physics

a current of 1.1 A flows through a coil when connected to a 110 V DC source . when 110V -50 Hz AC is applied to the same coil , only 0.5 A current flows . calculate the resistance ,impedance & inductance of the coil.

asked by Kashyap on November 12, 2018
1. ### electronics technician

1. A circuit contains a 10 F capacitor and a 30 F capacitor connected in parallel. What is the total capacitance of the circuit? A. 7.5 F C. 40 F B. 20 F D. 47 F 2. What is the time constant of a 2 mH inductor and a 200 

asked by mompati on June 18, 2013
2. ### Physics

A 1.0 KΩ resistor is connected in series with a 10.0 mH inductor, a 30.0 V battery, and an open switch. At time t=0, the switch is suddenly closed. What are the voltage drops VR and VL 20.00 µs after the switch is closed?

asked by Sam on April 13, 2011
3. ### physics

What is the time constant of a 10 H inductor and a 200 ohm resistor connected in series? Is my work correct? I did: T= L/R = 10 H divided by 200 ohm = 0.05 seconds = 50 milliseconds mS. Is that correct?

asked by Brett on December 6, 2016
4. ### Physics

A 30 ohm resistor is connected in parallel with a variable resistance R and the parallel combination is then connected in series with a 5 ohm resistor, and connected across 120 volt source. Find the minimum value of R if the power

asked by Mycah on March 25, 2017
5. ### Physics

A series combination of two resistors of resistance 12 Ù and 8 Ù is connected across a source of emf 24 V. What is the potential difference across 8 Ù resistors? Do you know the formula for this?

asked by struggling student on January 24, 2013
6. ### physics

A source of e.m.f 110v and frequency 60hz is connected to a resistor, an indicator and a capacitor in series. When the current in the capacitor is 2A.the potential difference across the resistor is 80v and that across the inductor

asked by Ayo on March 24, 2010