physics - drwls?

The flywheel of a steam engine runs with a constant angular speed of 250 rev/min. When steam is shut off, the friction of the bearings stops the wheel in 2.1 h.
At the instant the flywheel is turning at 75 rev/min, what is the tangential component of the linear acceleration of a flywheel particle that is 50 cm from the axis of rotation?

For Further Reading

* physics - drwls, Monday, March 12, 2007 at 6:14am

The flywheel will decelerate at a uniform rate, since the frictional torque and moment of inertia can be sonsidered constant. That rate is
alpha = -(250 rev/min)*(2 pi rad/rev)*(60 min/sec)/[(2.1 hr)*(3600 sec/hr)]
-12.5 rad/s^2
Multiply that "alpha" by the radius to get the tangential component of acceleration for a point on the rim of the wheel. It will not matter what the rpm is at the time. RPM will affect the centripetal acceleration, however.

* physics - winterWX, Tuesday, March 13, 2007 at 12:43am

I tried that and got -6233 mm/s^2 or -6.23 m/s^2 but that is the wrong answer. What am I doing wrong? Thanks.

I don't see any error in the method I suggested. 50 cm x -12.5 rad/s^2 is not -6233 mm/s^2, so I don't know how you got that.

I did 500mm x -12.5 rad/s^2 and got -6250 mm/s^2 which are the units asked for but that is the wrong answer. Not sure what to do now.

Thanks for explaining what you did. It seems OK to me now. I'm sorry I cannot be of further assistance with this question.


In the conversion of min to seconds, how did you conclude that 60 min were in one second?

  1. 👍 0
  2. 👎 0
  3. 👁 120

Respond to this Question

First Name

Your Response

Similar Questions

  1. physics

    The flywheel of a steam engine runs with a constant angular speed of 164 rev/min. When steam is shut off, the friction of the bearings and the air brings the wheel to rest in 1.6 h. I figured out the constant angular

    asked by help on September 27, 2010
  2. physics

    The flywheel of a steam engine runs with a constant angular speed of 164 rev/min. When steam is shut off, the friction of the bearings and the air brings the wheel to rest in 1.6 h. I found the constant angular acceleration as

    asked by help on September 28, 2010
  3. physics

    The flywheel of a steam engine runs with a constant angular speed of 250 rev/min. When steam is shut off, the friction of the bearings stops the wheel in 2.1 h. At the instant the flywheel is turning at 75 rev/min, what is the

    asked by winterWX on March 12, 2007
  4. physics

    The flywheel of a steam engine runs with a constant angular speed of 350 rev/min. When steam is shut off, the friction of the bearings stops the wheel in 1.0 h. A) At the instant the flywheel is turning at 75 rev/min, what is the

    asked by Need help on February 2, 2017
  5. college physics

    The flywheel of a steam engine runs with a constant angular speed of 165 rev/min. When steam is shut off , the friction of the bearings and of the air brings the wheel to rest in 2.30 hrs (a) What is the constant angular

    asked by Bami on June 8, 2010
  6. Physics

    The flywheel of a steam engine runs with a constant angular speed of 112 rev/ min . When steam is shut off, the friction of the bearings and the air brings the wheel to rest in 2.2 h. What is the magnitude of the constant angular

    asked by Ted on April 2, 2014
  7. Physics

    The flywheel of a steam engine runs with a constant angular speed of 321 rev/min (in the counterclockwise direction). When steam is shut off, the friction of the bearings stops the wheel in 1.9 h. (a) What is the constant angular

    asked by Anna on July 27, 2010
  8. physics

    The flywheel of a steam engine runs with a constant angular speed of 164 rev/min. When steam is shut off, the friction of the bearings and the air brings the wheel to rest in 1.6 h. I figured out the constant angular

    asked by question on September 28, 2010
  9. physics

    The flywheel of a steam engine runs with a constant angular velocity of 220 rev/min. When steam is shut off, the friction of the bearings and of the air stops the wheel in 2.7 h. (a) What is the constant angular acceleration, in

    asked by greg on March 5, 2008
  10. PHYSICS!!!

    The flywheel of a steam engine runs with a constant angular velocity of 220 rev/min. When steam is shut off, the friction of the bearings and of the air stops the wheel in 2.7 h. (a) What is the constant angular acceleration, in

    asked by greg on March 5, 2008

More Similar Questions