physics

A disk rotates about its central axis starting from rest and accelerates with constant angular acceleration. At one time it is rotating at 7 rev/s. 55 revolutions later, its angular speed is 21 rev/s.
(a) Calculate the angular acceleration.
(b) Calculate the time required to complete the 55 revolutions mentioned.
(c) Calculate the time required to attain the 7 rev/s angular speed.
(d) Calculate the number of revolutions from rest until the time the disk attained the 7 rev/s angular speed.

This is pretty straighforward. What is about it that you do not understand?

what equations do I use? thanks for your help.

  1. 👍
  2. 👎
  3. 👁

Respond to this Question

First Name

Your Response

Similar Questions

  1. Physics

    A dentist's drill starts from rest. After 3.20 s of constant angular acceleration it turns at a rate of 2.7 104 rev/min. (a) Find the drill's angular acceleration. (b) Determine the angle (in radians) through which the drill

  2. physics

    A wheel starts from rest and rotates with constant angular acceleration and reaches an angular speed of 12.0 rad/s in 3.00 s. Find the angle (in radians) throuh which it rotates in this time.

  3. physics

    The flywheel of a steam engine begins to rotate from rest with a constant angular acceleration of 1.45 rad/s2. It accelerates for 29.5 s, then maintains a constant angular velocity. Calculate the total angle through which the

  4. Physics

    Starting from rest, a disk rotates about its central axis with constant angular acceleration. In 6.00 s, it rotates 28.0 rad. During that time, what are the magnitudes of (a) the angular acceleration and (b) the average angular

  1. Physics

    A high-speed sander has a disk 5.70 cm in radius that rotates about its axis at a constant rate of 1120 revolutions per minute. a.) Determine the angular speed of the disk in radians per second. b.) Determine the linear speed of a

  2. Physics

    A wheel of radius R starts from rest and accelerates with a constant angular acceleration alpha about a fixed axis. At what time t, will the centripetal and tangential accelerations of a point on the rim have the same magnitude?

  3. Physics

    A disk at rest experiences a constant angular acceleration for t = 85 s, at the end of which it is spinning with a frequency of f = 45 rpm. Please answer the following questions. A)Write an expression for the magnitude of the

  4. AP Physics

    A record turntable is rotating at 33 and 1/3 rev/min. A watermelon seed is on the turntable 7.5 from the axis of rotation Calculate the acceleration of the seed assuming that it does not slip? Suppose that the turntable achieves

  1. Physics

    A disk starts at rest and accelerates with a constant angular acceleration α. After the disk completes one complete revolution, what is its angular velocity? ang.acc. = (ang.v. squared) / angle w = sqrt(angle x ang.acc.) = sqrt

  2. phys

    A disk with a rotational inertia of 2.0 kg.m^2 and a radius of 0.40 m rotates on a frictionless fixed axis perpendicular to the disk faces and through its center. A force of 5.0 N is applied tangentially to the rim. The angular

  3. physics

    A centrifuge in a medical laboratory rotates at an angular speed of 3,550 rev/min. When switched off, it rotates through 54.0 revolutions before coming to rest. Find the constant angular acceleration (in rad/s2) of the centrifuge.

  4. physics

    A 4.0 kg, 36-cm-diameter metal disk, initially at rest, can rotate on an axle along its axis. A steady 5.5 N tangential force is applied to the edge of the disk. What is the disk's angular velocity, in rpm, 4.0 s later?

You can view more similar questions or ask a new question.