Ask questions and get helpful responses.
Ask a New Question
  1. Questions

engineering mechanics (dynamics)

A 500 N weight is attached to a stiff rod of negligible weight that is hinged to one end. The rod is released from rest in horizontal position and allowed to swing freely in vertical arc. Through what angle with the horizontal must it swing to cause a tension in it of 1000N?

  1. 👍
  2. 👎
  3. 👁
  4. ℹ️
  5. 🚩
Mac

  1. =41.8 degree

    1. 👍
    2. 👎
    3. ℹ️
    4. 🚩
    billicom

Respond to this Question

First Name

Your Response

Similar Questions

  1. Physics

    One end of a uniform 3.20-m-long rod of weight Fg is supported by a cable at an angle of θ = 37° with the rod. The other end rests against the wall, where it is held by friction as shown in the figure below. The coefficient of

  2. physics

    if the pulleys are massless and frictionless and the rope is of negligible mass, and aristotle wanted to raise the 332 newton weight to a height of 6 meters. A-find the magnitude of force F he needed to pull on the rope to move

  3. College Algebra

    Hooke's Law states that the distance a spring stretches is directly proportional to the weight attached to the spring. If a 30-pound weight attached to the spring stretches the spring 8 inches, find how much weight is needed to

  4. Math/Physics

    A crane suspends a 500-lb steel beam horizontally by support cables (with negligible weight) attached from a hook to each end of the beam. The support cables each make an angle of 60° with the beam. Find the tension vector in

  1. physics

    A uniform rod 30cm long is pivoted at it's center. A 40N weight is hung 5cm from the left end. where must the 50N weight be hung to maintain equilibrium?

  2. Physics

    A thin rod, of length L and negligible mass, that can pivot about one end to rotate in a vertical circle. A heavy ball of mass m is attached to the other end. The rod is pulled aside through an angle and released. What is the

  3. Physics

    A rod is lying on the top of a table. One end of the rod is hinged to the table so that the rod can rotate freely on the tabletop. Two forces, both parallel to the tabletop, act on the rod at the same place. One force is directed

  4. physics

    A rigid rod holds a restaurant sign horizontally from the side of a building. The force due to gravity acting on the sign is 165N with the angle between the sign and the rod being 50 degrees. Ignoring the weight of the rod what is

  1. physics

    A uniform, 264-N rod that is 2.05 m long carries a 225-N weight at its right end and an unknown weight W toward the left end. When W is placed 47.9 cm from the left end of the rod, the system just balances horizontally when the

  2. Science physics

    A uniform metres rod of weight 100N carries a weight of 40N and 60N suspended from the 20Cm and 90cm marks respectively, where will your pivot a knife edge to balance the rod.

  3. Physics

    A uniform, 274-N rod that is 2.05m long carries a 225-N weight at its right end and an unknown weight W toward the left end.When W is placed 50.3cm from the left end of the rod, the system just balances horizontally when the

  4. Physics

    A thin, uniform rod is hinged at its midpoint. To begin with, one half of the rod is bent upward and is perpendicular to the other half. This bent object is rotating at an angular velocity of 6.8 rad/s about an axis that is

Still need help? You can ask a new question.