Plane trigonometry
 👍
 👎
 👁

 👍
 👎
Respond to this Question
Similar Questions

Geometry II
A conveyor belt carries supplies from the first floor to the second floor, which is 12 feet higher. The belt makes a 60° angle with the ground. How far do the supplies travel from one end of the conveyor belt to the other? Round

Physics
A 0.075 kg ball in a kinetic sculpture moves at a constant speed along a motorized conveyor belt. The ball rises 1.32 m above the ground. A constant frictional force of 0.350 N acts in the direction opposite the conveyor belt's

math
In 2 minutes, a conveyor belt moves 300 pounds of recyclable aluminum from the delivery truck to a storage area. A smaller belt moves the same quantity of cans the same distance in 6 minutes. If both belts are used, find how long

geometry
8. A conveyor belt carries supplies from the first floor to the second floor, which is 27 feet higher. The belt makes a 60° angle with the ground. How far do the supplies travel from one end of the conveyor belt to the other?

dynamics
the normal acceleration of a particle on the rim of a pulley 10 ft in diameter is constant @ 8000 ft/s^2. determine the speed of the pulley in rpm

Trig
assume a pulley has a radius of 12.96 cm. If it takes 18 seconds for 56 cm of belt to go around the pulley, find the angular velocity in radians per seconds

Trigonometry
Find the diameter of a pulley which is driven at 360 rpm by a belt moving at 40 ft/s. Then in 1 s the pulley turns through an angle theta measuring 12 pi radians and a point on the rim travels a distance s= 40 ft.

Physics
A piece of luggage is being loaded onto an airplane by way of an inclined conveyor belt. The bag, which has a mass of 10.0 kg, travels 6.50 m up the conveyor belt at a constant speed without slipping. If the conveyor belt is

math
A package is at rest on a conveyor belt, which is initially at rest. The belt is started and moves to the right for 1.3 s with a constant acceleration of 2 m/s^2 . the belt then moves with a constant deceleration a2 and comes to a

Physics (torque, if possible)
An electric motor turns a flywheel through a drive belt that joins a pulley on the motor and a pulley that is rigidly attached to the flywheel. The flywheel is a solid disk with a mass of 80.0kg and a dimaeter of 1.25m. It turns

Physics
Dana loads luggage into an airplane using a conveyor belt tilted at an angle of 20°.She places a few pieces of luggage on the belt before it starts to move, then she turns the belt on. It takes the belt 0.70 s to reach its top

Thermo engineering
The driveshaft of a building’s airhandling fan is turned at 300 RPM by a belt running on a 0.3mdiameter pulley. The net force applied by the belt on the pulley is 2000 N. determine the torque applied by the belt on the
You can view more similar questions or ask a new question.