math

a radial arm saw has a circular cutting blade with a diameter of 10 inches. it spins at 200 rpm. what is the linear speed of one of the 12 cutting teeth on a blade?

  1. 👍 0
  2. 👎 0
  3. 👁 359
  1. distance covered in 1 rotation = 10π inches
    distance covered in 200 rotations = 2000π inches

    speed = 2000π inches per 1 minute

    you did not specify which units your answer should be in.

    1. 👍 0
    2. 👎 0

Respond to this Question

First Name

Your Response

Similar Questions

  1. Physics

    a model of a helicopter rotor has four blades, each 3.40 m in length from the central shaft to the tip of the blade. The model is rotated in a wind tunnel at 550 rev/min. A) what is the linear speed, in m/s of the blade tip? B.)

  2. Physics

    A lawn mower has a flat, rod-shaped steel blade that rotates about its center. The mass of the blade is 0.65kg and its length is 0.55m. What is the rotational energy of the blade at its operating angular speed of 3450 rpm? If all

  3. Algebra

    The diameter of bolts produced by a certain machine distributed with a mean of 0.30 inches and a standard deviation of 0.01 inches. What percentage of bolts will have a diameter greater than 0.32 inches.Does your answer make sense

  4. maths

    A circular table is pushed into the corner of a rectangular room in such a way that it just touches two adjacent walls.An ant crawling on the table rim(on the minor arc between the two points of contact)observes that it is 8

  1. Algebra

    a tuxedo rental shop rents tuxedos with sleeve lengths from 20 inches to 40 inches. The shop says the length of the sleeves should be about 1.2 times a person's arm length. Write and solve a compound inequality that represents the

  2. Math

    For any circle, which ratio is equal to the number π? Select all that apply. ***A. Circumference ------------------- Diameter B. Circumference ------------------- Radius ***C. Circumference ------------------- 2 Times Radius D.

  3. TRIG

    A circular power saw has an 8-1/2 inch diameter blade that rotates at 4400 revolutions per minute. a)Find the angular speed of the saw blade in radians per minute. b)Find the linear speed in feet per minute of one of the 24

  4. Math - Please check!

    1. Find the circumference of a circle with a diameter of 11 cm to the nearest hundredth. Measurement formula C = pi x diameter a. 34.54 cm *** b. 17.27 cm c. 5.5 cm d. 33 cm 2. Which of the following is an irrational number? a.

  1. math;);)

    The diameter of a spherical grapefruit is 6.0 inches. An amateur fruit slicer misses its center by one inch. What is the radius of the circular slice?

  2. physics

    When a carpenter shuts off his circular saw, the 10.0-inch diameter blade slows from 4670 rpm to zero in 3.00 s. 1) What is the distance traveled by a point on the rim of the blade during the deceleration? (in ft} 2)What is the

  3. Trig

    A 7.25 inch circular saw blade rotates at 5200 revolutions per minute. a) Find the angular speed of the saw blade in radians per minute. b) Find the linear speed in feet per minute of one of the 24 cutting teeth as they contact

  4. AP CALC. AB

    Please help me with this problem and please walk me through each step i am really confused. Sand is falling from a rectangular box container whose base measures 40 inches by 20 inches at a constant rate of 300 cubic inches per

You can view more similar questions or ask a new question.