# Mechanical behavior

At a point in a plate subjected to plane stress loading along its surface, the cartesian stress components acting on the y-face of an element oriented along the (x,y) frame are σy=8MPa and τxy=16MPa,

The maximum allowable tensile (normal) stress, to prevent fracture of the material, is σo=40MPa.

What is the maximum permissible value (in MPa) for the normal stress on the x-face, σmaxx, to ensure that the material will not fracture?

σmaxx=

## Similar Questions

1. ### Mechanical Behavior of Materials

At a point in a plate subjected to plane stress loading along its surface, the cartesian stress components acting on the y-face of an element oriented along the (x,y) frame are σy=8MPa and τxy=16MPa, The maximum
2. ### Materials Science

At a point in a plate subjected to plane stress loading along its surface, the cartesian stress components acting on the x-face of an element oriented along the (x,y) frame are σx=40MPa and τxy=70MPa, The maximum
3. ### engg

At a point in a plate subjected to plane stress loading along its surface, the cartesian stress components acting on the x-face of an element oriented along the (x,y) frame are σx=40MPa and τxy=70MPa, The maximum
4. ### Materials Science

In this problem, you will construct the 2D Mohr's circle for two plane stress states defined in terms of the Cartesian components of the stress tensor in the x,y reference frame: [ σx,σy,τxy]. For each of these
5. ### Materials Science

A thin-wall cylindrical tank has radius R, wall thickness t≪R and is subjected to an internal pressure p. The cylindrical wall of the tank is constructed by welding steel plates along 45∘ seams, Consider a small
6. ### Materials Science

A compression bar, having a square cross section of side length b, must support a compressive load of magnitude W, uniformly distributed over the bar cross section. The bar is made of two segments connected by a glued joint along
7. ### solid mechanics

A steel plate is subjected to tensile stresses of 200MPa and 150 MPa at right angles to each other. Determine the normal and tangential stresses on a plane inclined at 60 to the 200 MPa stress. Also find the plane on which the
8. ### mechanical

A cylindrical tank with flat endplates is constructed from two sections that are welded together circumferentially.The outer diameter of the tank is 1.20, and the wall of the tank is 20.0 mm thick and the mamimum internal pressure
9. ### Engineering

A plane element is subjected to a shear stress τ = 360MPa which results to a shear strain σ = 0.008rad. a) determine the shear modulus G of the element b)What is the horizontal displacement, d, of the element if te
10. ### mechanical properties of materials

A flat plate specimen of a soft metal alloy is to be tested by pulling on round pins inserted through the ends of the plate, as illustrated below (a) Calculate the required diameter of the pins, given that the plate is 8.0 mm

More Similar Questions