.100 KG piece of metal is heated to 480°C and then quickly place in .250 KG of water at 20°C which is contained in a .200 KG aluminum calorimeter the final temperature of the water metal and calorimeter is 36°C what is the specific heat to Capacity of the metal piece

  1. 👍 0
  2. 👎 0
  3. 👁 327
  1. See your other H2O/Cu/Al problem just above.

    1. 👍 0
    2. 👎 0
  2. 39393

    1. 👍 0
    2. 👎 0

Respond to this Question

First Name

Your Response

Similar Questions

  1. Algebra

    One more rectangular-shaped piece of metal siding needs to be cut to cover the exterior of a pole barn. The area of the piece is 30 ft². The length is 1 less than 3 times the width. How wide should the metal piece be? Round to

    asked by Sandra on March 18, 2014
  2. physics

    a 200g aluminum container has 500g of water with an initial temperature of 22 degree celsius. The following heated pieces of metal are dropped into water at the same time as follows: 300g piece of aluminum heated at 100 degree

    asked by Anonymous on July 31, 2012
  3. physics

    A piece of metal of mass 112g is heated 100 degree C.,and dropped into a copper calorimeter of mass 40g containing 200g of water at 16 derreC. Neglecting the heat loss, the specific het of the meatal is nearly,if the equilibrium

    asked by kala on April 28, 2012
  4. Physics

    A 50 g sample of an unknown metal is heated to 90.0C. It is placed in a perfectly insulated container along with 100 g of water at an initial temperature of 20C. After a short time, the temperature of both the metal and water

    asked by Anonymous on February 14, 2016
  5. chemistry

    A calorimeter is filled with 250.0 g of water at 24.6oC. A 60.0 g sample of a metal at 100.0 oC is dropped in this calorimeter and causes the temperature to increase a total of 4.5oC. What is the specific heat of the metal (in

    asked by william on July 1, 2018
  1. Math

    A heated piece of metal cools according to the function c(x)=(.5)^(x−9), where x is measured in hours. A device is added that aids in cooling according to the function h(x)=−x−2. What will be the temperature of the metal

    asked by Please Help Me on October 8, 2014
  2. Calculus

    You are given a piece of sheet metal that is twice as long as it is wide an has an area of 800m^2. Find the dimensions of the rectangular box that would contain a max volume if it were constructed from this piece of metal by

    asked by Marie on March 26, 2014
  3. Chemistry-Dr.Bob

    An unknown piece of metal weighing 100. g is heated to 90.0 degrees Celcius. It is dropped into 250 g of water at 20.0 degrees Celcius. When equilibrium is reached, the temperature of both the water and piece of metal is 29.0

    asked by Sanaya on January 9, 2016
  4. Chemistry

    a 20.94-g sample of an unknown metal is heated to 99.4 degrees Celsius in a hot water bath until thermal equilibrium is reached. The metal is quickly transferred to 100 mL of water at 22.0 degrees Celsius contained in a styrofoam

    asked by Dalal on April 10, 2018
  5. Chemistry

    An unknown metal, heated to an unknown temperature until a liquid is dropped into a calorimeter that has 250 ml of water. The water heats up from 22 degrees Celcius to 29 degrees Celcius, at which point the temperature of the

    asked by Ivy on December 4, 2010
  6. college chemistry

    a 1.0kg sample of metal with a specific heat of 0.50KJ/Kg C is heated to 100.0C and then placed in a 50.0g sample of water at 20.0C . What is the final temperature of the metal and the water?

    asked by Kylie on September 30, 2014

You can view more similar questions or ask a new question.