AP Physics C

A 4.10 kg block is pushed along a floor by a constant applied force that is horizontal and has a magnitude of 39.0 N. Figure 6-26 gives the block's speed v versus time t as the block moves along an x axis on the floor. What is the coefficient of kinetic friction between the block and the floor?

  1. 👍 0
  2. 👎 0
  3. 👁 450

Respond to this Question

First Name

Your Response

Similar Questions

  1. Physic

    A 3.5 kg block is pushed along a horizontal floor by a force of magnitude 15 N at an angle è = 40° with the horizontal. The coefficient of kinetic friction between the block and the floor is 0.25. Calculate the magnitudes of (a)

    asked by Don on September 28, 2011
  2. physics

    A 50-kg block is pushed a distance of 5.0 m across a floor by a horizontal force Fp whose magnitude is 150 N. Fp is parallel to the displacement of the block. The coefficient of kinetic friction is 0.25. A) What is the total work

    asked by Amy on February 13, 2012
  3. PHYSICS

    A 4 kg block is pushed along the ceiling with a constant applied force of 85 N that acts at an angle of 55 degrees with the horizontal. The block accelerates to the right at 6 m/s^2. determine the coefficient of kinetic friction

    asked by Christy on February 24, 2007
  4. physics

    A 5.3-kg block is pushed 2.3 m up a vertical wall with constant speed by a constant force of magnitude F applied at an angle of θ = 30° with the horizontal, as shown in the figure below. If the coefficient of kinetic friction

    asked by sherry on February 27, 2016
  5. physics

    A 3.90 kg block located on a horizontal frictionless floor is pulled by a cord that exerts a force F=14.1N at an angle theta=32.5degrees above the horizontal, as shown. a.) What is the magnitude of the acceleration of the block

    asked by Carly on October 8, 2015
  1. Physics

    A 4 kg block rests between the floor and a 3 kg block. The 3 kg block is tied to a wall by a horizontal rope. If the coefficient of static friction is 0.800 between each pair of surfaces in contact, what force must be applied

    asked by Joe on December 19, 2012
  2. free-body diagram help

    A 20.0 kg block is being pushed forward on a flat surface with a force of magnitude 45.0 N against a frictional force of 13.0 N To draw this free-body diagram, would I only have the forces mentioned in the question? or would i

    asked by Liz on April 13, 2014
  3. Physics

    A 55-kg block, starting from rest, is pushed a distance of 5.0 m across a floor by a horizontal force Fp whose magnitude is 140 N. Fp is parallel to the displacement of the block. The final speed of the block is 2.35 m/s. A) What

    asked by Amy on February 13, 2012
  4. college physics

    A block of weight = 35.0 N sits on a frictionless inclined plane, which makes an angle theta = 27.0 with respect to the horizontal. A force of magnitude = 15.9 N, applied parallel to the incline, is just sufficient to pull the

    asked by Anonymous on February 25, 2010
  5. Physics

    A block of mass 3m is placed on a frictionless horizontal surface, and a second block of mass m is placed on top of the first block. The surfaces of the blocks are rough. A constant force of magnitude F is applied to the first

    asked by Brette on October 17, 2012
  6. physics

    The block in the figure below lies on a horizontal frictionless surface and is attached to the free end of the spring, with a spring constant of 65 N/m. Initially, the spring is at its relaxed length and the block is stationary at

    asked by help on December 14, 2008

You can view more similar questions or ask a new question.