# physics

Water is flowing into a factory in a horizontal pipe with a radius of 0.0223 m at ground level. This pipe is then connected to another horizontal pipe with a radius of 0.0400 m on a floor of the factory that is 10.6 m higher. The connection is made with a vertical section of pipe and an expansion joint. Determine the volume flow rate that will keep the pressure in the two horizontal pipes the same.

1. 👍 0
2. 👎 0
3. 👁 349

## Similar Questions

1. ### PHYSICS

Water flowing out of a horizontal pipe emerges through a nozzle. The radius of the pipe is 1.5 cm, and the radius of the nozzle is 0.42 cm. The speed of the water in the pipe is 0.68 m/s. Treat the water as an ideal fluid, and

asked by Anonymous on November 17, 2015
2. ### Physics

Water (η = 1.00E-3 Pa*s) is flowing through a horizontal pipe with a volume flow rate of 0.0120 m3/s. As the figure below shows, there are two vertical tubes that project from the pipe. Assume that H = 0.0421 m and L = 0.706 m.

asked by Alexa on November 14, 2012
3. ### physics

The concepts that play roles in this problem are similar to those in Multiple-Concept Example 15, except the fluid here moves upward rather than remaining horizontal. A liquid is flowing through a horizontal pipe whose radius is

asked by chel on March 10, 2013
4. ### Physics

Water is flowing through a horizontal pipe at a rate 0.2 m3/s. The pipe narrows from a radius of 10 cm to 4 cm. What is the change in pressure?

asked by Andrea on November 13, 2012
5. ### Math - Calculus

Water is flowing in a cylindrical pipe of radius 1 inch. Because water is viscous and sticks to the pipe, the rate of flow varies with distance from the center. The speed of the water at distance r inches from the center is

asked by Elsi on December 15, 2012
1. ### Physics

A horizontal pipe contains water at a pressure of 120kPa flowing with a speed of 1.4m/s . The pipe narrows to one-half its original diameter. a) what is the speed of the water? b) what is the pressure of the water? I tried using

asked by Lhaedy on December 11, 2013
2. ### Physics

The pressure of water flowing through a 6.5×10−2−m -radius pipe at a speed of 1.8m/s is 2.2 × 105 N/m2 What is the flow rate of the water? What is the pressure in the water after it goes up a 5.2−m -high hill and flows in

asked by Anonymous on April 12, 2015
3. ### math

Water flows through a pipe with the inner diameter of 20cm at a speed of 1m/s. How long does it take for the water flowing out from the pipe to fill a cylindrical tank with the base radius of 0.8m and the height of 0.5m?

asked by Tom on April 14, 2014
4. ### Physics

A horizontal pipe narrows from radius of 0.250 m to 0.100m.If the speed of the water in the pipe is 1.00m/s in the larger radius pipe,what is the speed in the smaller pipe

asked by TEMBA on August 7, 2019
5. ### physics

water moving in a horizontal pipe has a velocity of 9 m/s when the radius of the pipe os 0.025m. Determine the velocity of the water when it enters a wider section of the pipe and the radius is 0.075m.

asked by steph on December 2, 2011

More Similar Questions