physics

If I put the tip of a 100 foot pipe in the ocean and applied a perfect vacuum to the top, how high would the water rise in the pipe?

  1. 👍 0
  2. 👎 0
  3. 👁 40

Respond to this Question

First Name

Your Response

Similar Questions

  1. MATH

    Mimo wishes to leave a waitress a tip. Mimo has five coins in his pocket, a penny, a nickel, a dime, a quarter, and a half-dollar. If he uses exactly three coins for the tip, how many different tips are possible? A. 15 B. 5 C. 20

    asked by Vicky on December 1, 2014
  2. Math

    Power Plant on the River Problem As the construction manager for the Lightem Up Power Company , you make decisions to hep minimize costs of the company's construction projects. Today you've been asked to determine the path of a

    asked by Katie on November 17, 2008
  3. Math

    plumber needs four sections of pipe 2 7 8 feet long. Can this be cut from a 12 foot section? If so, how much pipe will be left over? If not, why not?

    asked by Kirk on March 25, 2010
  4. math/hurry

    A plumber needs four sections of pipe 2 7/8 feet long. Can this be cut from a 12 foot section? If so, how much pipe will be left over? If not, why not?

    asked by Kirk on March 26, 2010
  5. math

    what is the weight of a ten foot length of steel pipe? the inside diameter of the pipe is 3/4 of an inch, and the outside diameter i one inch. steel weighs 490lbs. per cubic foot.

    asked by jean on June 9, 2010
  6. math

    what is the weight of a ten foot length of steel pipe? the inside diameter of the pipe is 3/4 of an inch, and the outside diameter i one inch. steel weighs 490lbs. per cubic foot.

    asked by billy bob on June 9, 2010
  7. Fluid Mechanics

    Oil (sp. gr.= 0.8) flows smoothly through the circular reducing section shown at 3 ft^3/s. If the entering and leaving velocity profiles are uniform, estimate the force which must be applied to the reducer to hold it in place.

    asked by Katy on September 19, 2013
  8. Fluid Mechanics

    Oil (sp. gr.= 0.8) flows smoothly through the circular reducing section shown at 3 ft^3/s. If the entering and leaving velocity profiles are uniform, estimate the force which must be applied to the reducer to hold it in place.

    asked by Katy on September 17, 2013
  9. Fluid Mechanics

    Oil (sp. gr.= 0.8) flows smoothly through the circular reducing section shown at 3 ft^3/s. If the entering and leaving velocity profiles are uniform, estimate the force which must be applied to the reducer to hold it in place.

    asked by Katy on September 19, 2013
  10. Fluid Mechanics

    Oil (sp. gr.= 0.8) flows smoothly through the circular reducing section shown at 3 ft^3/s. If the entering and leaving velocity profiles are uniform, estimate the force which must be applied to the reducer to hold it in place.

    asked by Katy on September 22, 2013

More Similar Questions