# compressor operations

We are operating a centrifugal compressor. The gas composition does not change during this excursion. While holding suction pressure and flowrate constant, the inlet temperature rises. What would you expect to happen to the discharge pressure, and why

1. 👍 0
2. 👎 0
3. 👁 105

## Similar Questions

1. ### Thermodynamics

Consider air as an ideal gas with Cp=1000 J/(kg.K), R=287 J/(kg.K) and γ≈1.4. It is compressed from 1 bar, 300K to 10 bar using a compressor. The compressor can be considered adiabatic but not reversible. The flow rate is 2

asked by ABCD on November 22, 2016
2. ### Thermodynamics

Consider air as an ideal gas with Cp=1000 J/(kg.K), R=287 J/(kg.K) and Î³â‰ˆ1.4. It is compressed from 1 bar, 300K to 10 bar using a compressor. The compressor can be considered adiabatic but not reversible. The flow rate is

asked by ABCD on November 22, 2016
3. ### Thermodynamic

One mole of CO2 is to be compressed adiabatically from 1 bar and 25 C. Because of irreversibilities and poor design of the compressor the compressor work required is found to be 25 %greater than that for a well-designed

asked by Charles on March 8, 2016
4. ### lube oil systems

With many lube oil systems, it is common to cool the oil before it is pumped to the end user (engine, compressor, etc). However, for large centrifugal compressors, it is common to pump the lube oil hot, and cool the oil

asked by Tony on January 29, 2014
5. ### Chemistry

Is the following a physical or chemical separations: salt water --> water+ sodium chloride Do you change the composition of the water? Do you change the composition of the salt. I can't say which because you don't tell me how you

asked by George on September 9, 2006
6. ### physics

A reciprocating compressor is a device that compresses air by a back-and-forth straight-line motion, like a piston in a cylinder. Consider a reciprocating compressor running at 150 rpm. During a compression stroke, 1.30 mol of air

asked by Joseph on May 30, 2011
7. ### Physical Education

Preliminary design of a compressor drive train Determine the force-time function within the compressor’s cylinder and the torque-time function acting on the input shaft on the compressor during any cycle. Given: Compressor speed

asked by IceBerg on August 24, 2011
8. ### chemistry

In which of the following ways would you change the glass sample to make the ion exchange more efficient? a)Change the composition of the glass to increase the proportion of B2O3. b)Change the composition of the glass to add Na2O,

asked by Anonymous on April 10, 2013
9. ### physics

The Hyperloop is a hypothetical new fast transport system between cities, which works by launching pods that carry people through a very low air pressure tunnel. The Hyperloop reduces friction between the pods and the tunnel by

asked by dan on August 22, 2013
10. ### physic

Given: Compressor speed is 1500rpm. The compressor has a bore of 3.125 in, a stroke of 3.26in and a connecting rod crank ratio to 3.5. Inlet pressure is atmospheric 14.7 psia, peak cylinder pressure is 132psia, and mean active

asked by zenden on August 12, 2012

More Similar Questions