
 👍 0
 👎 0
posted by Steve
Respond to this Question
Similar Questions

Math
A rectangular piece of metal with 4 equally sized circular holes have a diameter of 12 cm cut from it. Calculate the area of metal after the holes have been cut out 339.12cm squared Rectangle formula : l x w Circle : π × r2
asked by Jerald on January 14, 2014 
Precalculus
From a circular piece of metal sheet with diameter 20 cm, a rectangular piece with perimeter 28 cm is to be cut as shown. Find the dimensions of the rectangular piece.
asked by Yna on November 27, 2018 
Maths
A rectangualr metal sheet is 32m long, 16m wide and 12mm thick. Eight circular holes, each of diameter 3m are cut in the sheet, so that none of the holes overlap. Calculate the volume of metal remaining, correct to 3 decimal
asked by Jiskhaa on January 15, 2012 
Math
A piece of rectangular metal has 8 holes punched in it that lie in a straight line.If there are 1 1/16 inches between the centers of two consecutive holes find the distance from the center of the first hole to the center of the
asked by Mike on February 9, 2008 
maths
from a rectangular piece of metal sheet of length and breadth 1.60 m and 80 cm respectively, 3 circular sheets of 20 cm radius are cut out. what area of metal is left?
asked by parth on March 23, 2013 
Algebra
One more rectangularshaped piece of metal siding needs to be cut to cover the exterior of a pole barn. The area of the piece is 30 ft². The length is 1 less than 3 times the width. How wide should the metal piece be? Round to
asked by Sandra on March 18, 2014 
Algebra
A box is to be formed from a rectangular piece of sheet metal by cutting squares measuring 5 inches on a side and then folding the sides. The piece of sheet metal is twice as long as it is wide. If the volume of the box is to be
asked by Terry on December 17, 2014 
Math: Geometry
Joe is making a toy from a rectangular block of wood. He drills two holes, each with diameter 1.4 cm, through the block. The block of wood has length 15 cm, width 8 cm, and height 5 cm. a)What is the volume of the block before the
asked by Thomas Simmons on April 6, 2015 
Math
Twelve equally spaced holes are to be drilled in a 34 1/4 inch metal strip, after 2 inches are cut off on each end. What is the distance, to the nearest hundredth of an inch, from center to center of 2 consecutive holes? _______
asked by Mike on February 17, 2008 
Math
Pupils in a school prepared a circular flower garden of diameter 28 meters. They dug holes each 4 meters apart along the circumference for planting flowers. How many holes were dug?
asked by K on February 2, 2018