math

posted by .

the load which a crame can lift up is directly proportional to the mass and inversely proportional to the height through which the load is to be lifted. If a load of 40 and mass of 175gm is lifted through height of 286m from what load will be carried through height 50m given the mass as 250gm?

  • math -

    L = km/h
    when L = 40, m=175, h = 286 , (skipping the units)

    40 = k(175)/286
    k = 286(40)/175 = 2288/35

    L = (2288/35)m/h , plug in h=50 and m=250

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Applied Mech. (with my answer..lol)

    What load can be lifted by a screw jack given: Toggle1 length:520mm Force applied:230N Toggle2 lenght:445mm Force applied:300.557N Mean pitch of thread:13mm S.J. efficiency:35% My answer: Assuming T2 to be 520mm long, the equivalent …
  2. Is my math correct(2)

    What load can be lifted by a screw jack given: Toggle1 length:520mm Force applied:230N Toggle2 lenght:445mm Force applied:300.557N Mean pitch of thread:13mm S.J. efficiency:35% My answer: Assuming T2 to be 520mm long, the equivalent …
  3. Physics

    A 285-kg load is lifted 22.0 m vertically with an acceleration a=0.170 g by a single cable. Determine the tension in the cable. (N) Determine the net work done on the load. (J) Determine the work done by the cable on the load. Determine …
  4. physics

    A person uses a lever to lift a load. The person pushes downward with a force of 17 N a vertical distance of 1.8 m. Under ideal condidtions (no friction, bending, etc.), how high up can a load weighing 610 N be lifted?
  5. PHysics

    A 250 kg load is lifted 23 m vertically with an acceleration a = 0.185g by a single cable Determine the tension of the cable. =2900N Determine the net work done on the load. =?
  6. physics

    Find the force (in newton) required to lift a mass of 26 kg load with a wheelbarrow (2nd class lever) with the load at 0.75 m from the fulcrum and being lifted at 1.7 m from the fulcrum, assuming ideal conditions.
  7. Engineering Science N4

    The diameter of the ram cylinder of a hydraulic press is 200mm. The stroke length of the plunger is 50mm. the effort on the plunger is 5% of the load. Calculate, i) the volume of the liquid needed per stroke if the load has to be lifted …
  8. maths

    the load which a crame can lift up is directly proportional to the mass and inversely proportional to the height through which the load is to be lifted.if a load of 40+ and mass of 175gm is lifted through height from what load will …
  9. maths(variation)

    pls when solving finish it up!!! Very urgent! 1) the load which a crame can lift up is directly proportional to the mass and inversely proportional to the height through which the load is to be lifted.if a load of 40 and mass of 175gm …
  10. variation

    the load which a crame can lift up is directly proportional to the mass and inversely proportional to the height through which the load is to be lifted.if a load of 40 and mass of 175gm is lifted through height of 286m,from what load …

More Similar Questions