material science

posted by .

What is the ratio of the maximum axial stress to the maximum bending stress in the inclined cell walls of hexagon honeycombs in terms of t,h ,l, and theta?

  • material science -

    (t/l)*cos(theta)/(3*sin(theta))

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. statics

    A cantilever beam member made from steel with hollow circular cross section experiences an axial load of 300 KN (F1), and a vertical load of 200 kN (F2) as shown in the following figure. The outside diameter of the beam is 50mm and …
  2. Physics

    The cylindrical bar in the figure has a total length L=1.2 m, a diameter d=15 mm, and is confined by fixed supports at the walls A and B. A concentrated axial load FC=30 kN is applied to the bar at point C as indicated in the figure, …
  3. stress

    The shear stress in a plane normal of which makes an angle of 30 degree with the direction of maximum principal stress will be ?
  4. Materials Science

    At a point in a plate subjected to plane stress loading along its surface, the cartesian stress components acting on the x-face of an element oriented along the (x,y) frame are σx=40MPa and τxy=70MPa, The maximum allowable …
  5. engg

    At a point in a plate subjected to plane stress loading along its surface, the cartesian stress components acting on the x-face of an element oriented along the (x,y) frame are σx=40MPa and τxy=70MPa, The maximum allowable …
  6. Materials Science

    A 3-point bending test is performed on a simply supported beam of length L=4m and of rectangular cross-section, with width b and height h. For a central load of 10kN, draw the bending moment and shear force diagrams for the beam. Then …
  7. Mechanical Behavior of Materials

    At a point in a plate subjected to plane stress loading along its surface, the cartesian stress components acting on the y-face of an element oriented along the (x,y) frame are σy=8MPa and τxy=16MPa, The maximum allowable …
  8. Mechanical behavior

    At a point in a plate subjected to plane stress loading along its surface, the cartesian stress components acting on the y-face of an element oriented along the (x,y) frame are σy=8MPa and τxy=16MPa, The maximum allowable …
  9. Physics

    Hi everybody! can someone please help me with this problem?
  10. material science

    Derive an expression for the relative density, ρ∗/ρs, of an anisotropic honeycomb with hexagonal cells:n which the vertical cell walls are of length h, the inclined cell walls are of length l, the angle between the horizontal and …

More Similar Questions