how to cut a 10 ft board into 9 smaller boards
10/9 = 1.111 feet for each board
To cut a 10 ft board into 9 smaller boards, you will need to divide the total length of the board evenly among the 9 pieces. Here's a step-by-step guide on how to do it:
1. Determine the desired length for each smaller board. Since you want to cut the 10 ft board into 9 pieces, each smaller board should be approximately 10ft/9, which is 1.11 ft or roughly 13.33 inches.
2. Measure and mark the length of the smaller boards on the 10 ft board. Start at one end and measure out 1.11 ft, then make a mark. Repeat this process until you have 9 evenly spaced marks on the board.
3. Use a straight edge or a guide to connect the marks you made. This will give you a cutting line that shows where to make the cuts.
4. Use a saw, such as a circular saw or a handsaw, to carefully cut along the marked lines. Make sure to follow proper safety precautions and ensure that your cuts are straight and accurate.
5. After making each cut, set aside the smaller board and repeat the process until you have cut the entire 10 ft board into 9 smaller boards.
Remember to always measure carefully and double-check your calculations to ensure that each smaller board is the desired length. Take your time and be cautious when using the saw to avoid accidents or errors.