Math
posted by Synthia .
A crate with no lid is shaped like a cube with sides that are 0.8 m long. What is the surface area of the crate?
Respond to this Question
Similar Questions

Physics
A force F=180 N pulls a crate at a 60 degree angle on a rough surface. The weight of the crate is 296 N and the friction force between the crate and the surface is 90 N. What state of motion might the crate be in? 
Physics
A uniform crate with a mass of 16.2 kg rests on a floor with a coefficient of static friction equal to 0.571. The crate is a uniform cube with sides 1.21 m in length. what is the minimum height where the force F can be applied so that … 
physics
refer to a situation where you exert a force F on a crate of mass M, moving it at a speed v a distance d across a floor in a time interval t. The quantity F d/t is? 
physics
refer to a situation where you exert a force F on a crate of mass M, moving it at a speed v a distance d across a floor in a time interval t. The quantity F d/t is? 
math
A crate shaped like a cube has side lengths of 50cm, if blocks with a volume of 125 cm3 will fill the crate, how many blocks will fit in the crate? 
Physics
A crate of mass 50.0 kg rests on a flat surface, and there is a coefficient of static friction of 0.200 between the crate and the surface. A person pushed on the crate with a force of 5.00 N at an angle of 25.0 degrees below the horizontal. … 
physics
The force of friction between a crate and the floor it is sliding over depends on? 
physics
A 130kg crate is initially at rest on a horizontal frictionless surface. An applied force of 400 N to the right is exerted on the crate, causing it to move and cover a distance of 26.0 m. At the end of its path, the crate is found … 
geometry
A small shipping crate is a cube with a side length of 8 inches and a surface area of 384 square inches. A large shipping crate has a surface area of 864 square inches. What is the side length of the large crate? 
Physics 11
A 140 kg stationary crate is pulled by a force of 390 N along a horizontal surface. a) The coefficient of static friction between crate and surface is s = 0.25. Is the applied force large enough to begin moving the crate?